BladeUPS (12-60 kW)
12Pages

roduct Brochure ustom or pre-assembled configurations Powering Business Worldwide An Eaton Green Product

Introducing the BladeUPS uninterruptible power system Designed specifically for high-density computing environments, the Eaton® BladeUPS® delivers 12 kW of efficient, reliable power in only 6U of standard rack space, including batteries. Expand capacity by combining 12 kW modules in a building block fashion to deliver 60 kW of redundant backup power from a single rack enclosure. This powerful configuration delivers higher power density than competitive, modular solutions, while dissipating only one-third of the heat. The standard internal batteries provide needed ridethrough power until an...

Reduce energy costs with high efficiency As utility rates continue to climb, energy efficiency becomes a sticking point with data center managers. The BladeUPS delivers an outstanding, industry-leading 98 percent efficiency in normal operation. Even at <50 percent load, where efficiency is typically much lower, this UPS performs more efficiently than competitors’ modular products at full load. In addition to dramatic cost savings, high system efficiency extends battery runtimes and produces cooler operating conditions within the UPS, extending the life of components and increasing overall...

Meet current and changing requirements with modular architecture The building block of the BladeUPS system is a 6U rackmount module that provides 12 kW of backup power protection. The system expands easily to provide maximum results. As your data center grows, the system’s modularity plays a key role in optimizing your capital planning and deployment. Using the patented and field-proven Powerware Hot Sync paralleling technology, up to six BladeUPS modules can be paralleled for extra capacity or redundancy, providing 60 kW of redundant backup power protection in one 19-inch rack. Patented...

Easy setup with simple parallel configuration changes The BladeUPS is easy to install, configure, and deploy—and easy to expand later, without help from Eaton. To link multiple BladeUPS modules into a parallel configuration, all you need is a BladeUPS Parallel Bar—a simple kit installed in the bottom of the rack and on the back rail. IT personnel can then simply plug additional modules into the parallel bus bar. The system is intelligent, so it automatically detects paralleled modules and fully configures itself for parallel operations. Eaton also offers an assortment of plug-and-play power...

+ + Bypass Bypass Bypass Save space with high power density UPS The BladeUPS offers the smallest footprint of any UPS in its class, as well as double the power density of any other UPS on the market. This compact design leaves more space for IT equipment in the rack and data center. Competitor B: 60 kW N+1 system Competitor B: 60 kW N+1 system Competitor B: 60battery and internal with six-minute kW N+1 system with six-minute battery and internal six-minute battery and internal withmanual maintenance bypass manual maintenance bypass manual maintenance bypass UPS UPS UPS UPS + + UPS UPS + +...

Eaton BladeUPS pre-assembled system Take advantage of Eaton’s turnkey solution with the BladeUPS pre-assembled system. Order depending on your power requirements, pre-assembled systems with one to six BladeUPS units installed, providing the right level of power protection today while looking ahead to future growth. The top-entry models are ideal for data center environments that don’t have a raised floor and a flexible option is available to facilitate data center moves, additions or changes. Bottom entry models are also available. S-Series Rack Eaton S-Series Racks are scalable and feature...

BladeUPS pre-assembled system - bottom entry (12 kW to 60 kW N+1) BladeUPS pre-assembled system - bottom entry (12 kW to 48 kW) Part Number Part Number 12 kW, 208V, with (1) Web/SNMP card 12 kW, 208V, with (1) Web/SNMP card 12 kW, 208V with (1) Power Xpert SNMP/ModBus card 12 kW, 208V with (1) Power Xpert SNMP/ModBus card 24 kW, 208V with (1) Web/SNMP card 24 kW, 208V with (1) Web/SNMP card 24 kW, 208V with (1) Power Xpert SNMP/ModBus card 24 kW, 208V with (1) Power Xpert SNMP/ModBus card 36 kW, 208V with (1) Web/SNMP card 36 kW, 208V with (1) Web/SNMP card 36 kW, 208V with (1) Power Xpert...

Power management software Eaton’s BladeUPS configurable and pre-assembled systems seamlessly integrate into the major virtualization platforms, offering up to 10 free power nodes and allowing you to view your entire data center on a single dashboard. Power Xpert software Using Power Xpert® software, you can also monitor the status of multiple UPSs and ancillary devices to accurately diagnose past events and predict future conditions. Intelligent Power Software Suite With Intelligent Power® Manager supervisory software, you get a global view across the network from any PC with an Internet...

Count on reliable performance and uptime Recognizing the mission-critical nature of data center operations, the BladeUPS has been designed for premium reliability and continuous operation. The rackmount BladeUPS incorporates leading technologies that Eaton developed for its largest UPSs, such as: Eaton's advanced battery management technique. ABM technology significantly extends battery service life with a unique three-stage charging technique. The UPS automatically tests battery health and provides advance notification when preventive maintenance is needed, allowing ample time to hot-swap...

Simplify UPS installation and maintenance The BladeUPS is easy to install, configure and deploy. All BladeUPS modules (UPS and battery) come with rackmount kits for easy installation in standard equipment racks. In-house IT staff can install and service this UPS themselves. Adding parallel units for future expansion is a simple, plug-and-play procedure. The BladeUPS battery trays are user-replaceable so that one person, working alone, can replace the battery without disrupting data center operations or power to protected equipment. Most IT teams are confident managing the BladeUPS without...