Catalogs >
Eaton Commercial Controls >
Toggle switch accessories

Toggle switch accessories
4Pages

Catalog excerpts

Effective February 2013 Supersedes September 2008 Toggle switch accessories Table 1. Indicating Plates for 15/32-Inch Bushing-Mounted Switches Marking Keyway Location Opposite Keyway Keyway Side Part Number RUN HOT HI ON FOR AUTO PUSH RUN BLANK START COLD LOW STOP REV TEST START TEST BLANK 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch brass 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch brass 0.032 inch steel 0.032 inch steel Plain Statuary bronze Burnished nickel Black cupric oxide a Statuary bronze Burnished nickel Burnished nickel Burnished nickel Burnished nickel Burnished nickel Burnished nickel Burnished nickel Burnished nickel Burnished nickel Plain Burnished nickel Brushed Burnished nickel Burnished nickel 0.032 inch steel 0.032 inch steel 0.032 inch steel 0.032 inch steel Burnished nickel Burnished nickel Burnished nickel Burnished nickel 0.032 inch steel 0.032 inch steel Burnished nickel Burnished nickel

Open the catalog to page 1

Toggle switch accessories Table 2. Switch Guards Switch Positions Keyway Location Catalog Number a Red phenolic lever material. Red-Molded Plastic 15/32-32 UN-2A Thread to Within 0.060 (1.52) of Shoulder Figure 1. Switch Guard—Approximate Dimensions in Inches (mm) Table 3. Mounting Hardware for One-Hole Mounting Switches—Dimensions in mm (Inches) Size Mounting Nuts 15/32-32 Hexagon locknut Hexagon facenut Knurled facenut Chamfered dress nut Standard knurl nut with shoulder Dress nut Knurled dress nut Mounting Washers and Locking Ring For 15/32 Plain washer bushing Internal tooth...

Open the catalog to page 2

Toggle switch accessories Table 4. Dimensions—Approximate in mm (Inches) Panel seal • Behind panel mounting Stainless steel cup washer ensures proper seating of silicone rubber seal Seal withstands 20 psi water pressure Hexagon Locknuts or Facenuts Prevents moisture and contaminants from entering panel enclosure Knurled Dress Nut Catalog Number 15-1048-3 1/16-Inch Lettering (located on angular surface) 0.105 0.120 Knurled Facenut Dress Nut Catalog Number 15-2523-4 Knurled Nut with Shoulder Figure 2. Panel Seal—Dimensions in Inches Internal Tooth Lockwasher Knurled Dress Nut Catalog...

Open the catalog to page 3

Technical Data TD07002001E Effective February 2013 Toggle switch accessories Eaton Corporation Electrical Sector 1111 Superior Avenue Cleveland, OH 44114 USA Eaton.com © 2013 Eaton Corporation All Rights Reserved Printed in USA Publication No. TD07002001E / Z13275 February 2013 Eaton is a registered trademark of Eaton Corporation. All other trademarks are property of their respective

Open the catalog to page 4