MANUAL SPRING TESTER DOMO, is a manually operated spring tester with two speeds [fast and slow] and with two adjustable stops for performing series of tests. It will be possible to check the force and length of compression and traction springs with the touch-screen panel. The structure is C-shaped, with a working opening of 197 mm and with the possibility of installing a spring guiding rod. The instrument is equipped with an incremental optical scale [on request an absolute linear encoder can be fitted] and an electronic load cell for measuring the loads acting on the spring. The sagging of the load cell is self-compensated and, on request, up to 2 cells can be installed. NEW TECHNOLOGY! 100.000 DIVISIONS! 6157.20 EASYDUR IT All ANA di Rsrato Alfri Ma Maja 5-21051 Arasata|VA|-Italy Tal. +33 0332 20362S - Fax +33 0332 20G710 infoeeasydur com - www.easydur.com The new electronics allow a maximum resolution of up to 100,000 divisions. The position and force are shown in real time on the broad and luminous touch-screen display. The measuring units can be changed easily and the measurement tolerances are easily set. Other characteristics of the instrument are: - 7” touchscreen display - Possibility of installing an absolute linear encoder - Self-zeroing load cell - Selectable units of measurement: kg, g, N, lb [load] mm, inch [position] TESTING EQUIPMENT - Data exported by USB connection, easily importable in Excel. TECHNICAL DATA MINIMUM DIVISION 10 fjm [incremental linear encoder] - 0,1 fjm [absolute linear encoder] MAX RESOLUTION up to 100.000 divisions EASYDUR ITALIANA di Renato Affri Via Maja 5 - 21051 Arcisate [VA] - Italy - Tel. +39 0332 203626 - Fax +39 0332 206710 [email protected] - www.easydur.com