BREAKING LOAD, ELONGATION AND BENDING CLASS 0.5 TESTS The 3MZ model is an electro-mechanical system instrument. This allows our customers to perform their tests with the highest precision and the lowest possible energy consumption. Thanks to our internal EASYQS software (running on Windows 10) developed by our R&D department over the last 20 years, our customers can fully work following the Industry 4.0 method, thanks to the possibility of interfacing 3MZ with all the Customer Management Software. Depending on the different applications, we are able to provide video, automatic or manual strain gauges, for elongation tests with the highest precision, in compliance with the specific standards. Easydur can also supply automatic tensile testing systems, for “IN LINE” control, using the latest generation of robots. 3MZ TENSILE Number of guide columns Number of ball screw Vertical Test space (without Grips) (mm) Horizontal Test space Testing speed Range min max (mm/min) Position control resolution Frame axiale stiffness (kN/mm) Force measurement accuracy Precison class Class 0.5 from 1% of load cell capacity / Class 1 from 0.2 % of load cell capacity as EN ISO 7500-1 Displacement measurement accuracy Testing speed accuracy Calculated resolution (for example in tensile / compression direction) Data acquisation rate, internal Data Acquisition Rate at the PC Controller /Cycle Time Power supply Single Phase Voltage: 230 VAC +/- 10%; 50 - 60 Hz Operating Temperature Storage Temperature Humidity Range Drive System AC Servo motor Brushless Noise level at maximum test speed (dBA) TENSILE TEST STANDARDS OF REFERENCE Based on the type of sample being tested and the testing method, the 3MZ series allows the customer to complete different types of tests meeting the most important world standards: Sheet steel: ASTM E517, ASTM E345, ASTM E446, DIN 50154 Ducts and pipes: ISO 3183, ISO 6892-1, ASTM A370, Metal tensile tests with climate chamber: ASTM E21, ISO 6892-2, ISO 6892-3, GOST 9651 Welded metal: ISO7438, ISO 5173, ASTM E190, ASTM E290 Cast and forged products: ISO 3266, EN 818-X, EN 1677-X Welded metal: ISO 4136, ISO 5178, ISO 5173 Alloy samples: ASTM B348, ASTM B557 Hot rolled steel tensile tests: ISO 6892-1 EASYDUR SRL Via Maja 5 - 21051 Arcisate (VA) - Italy - Tel. +39 0332 203626 - Fax +39 0332 206710 [email protected] - www.easydur.com