Specifications:
The Easy-Laser XT280 is a vibration measurement tool with a frequency range of 2 Hz to 1 kHz (ISO) and 1 kHz to 10 kHz (BDU). It offers a maximum frequency resolution of 1.25 Hz at an 800 lines FFT setting. Amplitude units are displayed in acceleration (g), velocity (mm/s or inch/s), and bearing noise (BDU). Frequency units are shown in Hertz (Hz), RPM, or CPM. The device has a dynamic range of 96 dB with a resolution of 0.01g and operates within a temperature range of 0°C to 50°C, with storage temperatures from -20°C to 70°C. It is powered by two AA batteries, providing up to 20 hours of continuous operation, and is protected by an IP67 environmental rating. The device is made from ABS plastics and hard anodized aluminum, measuring 200 mm x 60 mm x 26 mm and weighing 280 g.

Procedures and Usage:
The XT280 is designed for easy use in vibration monitoring and analysis, automatically performing functions based on machine running speed to diagnose faults such as unbalance, misalignment, and looseness. It is suitable for measuring vibrations in pumps, motors, fans, and bearings, displaying frequency plots and monitoring vibration severity and bearing condition. The device can connect to the XT Alignment App for documentation purposes, allowing results to be saved as PDFs with photos and comments.

Accessories and Compatibility:
The XT280 comes with a USB memory stick containing documentation, a carrying case, and is compatible with the Easy-Laser XT Alignment App, which is available for download. The app can be run on phones, tablets, or the XT Display unit. Additional accessories include a long probe and a magnet.

Standards and Compliance:
The product complies with EN60825-1, 21 CFR 1040.10, and 1040.11 standards and contains FCC ID: QOQBT121. Easy-Laser AB is ISO 9001 certified, offering a 3-year warranty and global support.