Semiautomatic turntable wrapper Headquarters, Engineering & Manufacturing: Pol. Ind. Can Barri - C. Esqueis, 27 | 08415 Bigues i Riells (Barcelona) T +34 93 844 96 16 | [email protected] | www.earflap-group.coml

Data sheet: SEMIAUTOMATIC TURNTABLE WRAPPER MODEL 300 Rev. 06/2019 STANDARD MACHINE TECHNICAL CHARACTERISTICS ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ EAR-FLAP® profile Hinged mast. Powered film carriage with variable speed, placed sidewise. Powered pre-stretch 300% with foot trapping detector and roping system. Automatic load height detection by photocell. Turntable dimensions: Ø1.650 mm and 10 mm thick plate. Soft start/stop by SCHENEIDER frequency inverter with return to start position. 10 customizable wrapping programs. Wrapping cycles counter. Independently adjustable top & bottom reinforcement wraps....

Data sheet: SEMIAUTOMATIC TURNTABLE WRAPPER MODEL 300 Rev. 06/2019 1. Turntable accessing ramp 3. Scale with display 4. Powered pre-stretch 300% with roping system (standard) 5. Powered top platen SPECIAL CUSTOMIZATION ON DEMAND ■ Ultrasonic detector for black loads ■ Stainless steel 304 ■ ATEX explosive environments ■ Enviroments up to -30°C ■ Special heights ■ Special platforms ■ Ramps and hoists for cargo loading with stackers ■ Different pre-stretch ratios 150%, 200%, 300% or 400% Special features Protective corners mode: the system provides a special mode with 45° turns to apply protective...

Data sheet: SEMIAUTOMATIC TURNTABLE WRAPPER MODEL 300 Rev. 06/2019 Standard machine layout Due to a continuous development and progress policy, EAR-FLAP® GROUP reserves the right to modify the features and specifications without notice. This document shall not be deemed a contract. Its total or partial reproduction is forbidden. Authorised by GMC.