Catalogs >
EAO France >
Series 04 / 44 - E-Stop Protective Shroud

Series 04 / 44 - E-Stop Protective Shroud
3Pages

Catalog excerpts

Series 04 / 44 - E-Stop Protective Shroud - 1

EAO – Your Expert Partner for Human Machine Interfaces EAO Series 04 & Series 44 E-Stop Protective Shroud Drawings 56 Key insert switch actuator 3 positions Conductor Switch, flush mounting page 46 56 Key insert switch actuator 3 positions Conductor Switch, flush mounting page 46 EAO designers are aware of international standards and regulations that impact the design and use of E-Stops. EAO’s products are RoHS and REACH compliant, meet UL requirements, Electrosuisse (a Swiss designation), DIN EN, and CE (European Union) approvals. Every device is oil and watertight to a minimum IP 65. 58 Emergency-stop protective shroud page 60 58 Emergency-stop protective shroud page 60 704.927.8 eao eao Protective shroud 704.927.9, EAO’s 83 mm E-Stop shroud, fulfills the requirements of the semiconductor industry standard SEMI S2-93/12.4c for a diameter no less than 75 mm (3 inches). According to the standard, the EMO should be located in an area not subject to accidental activation. If a button guard is installed, its diameter should be no less than 75 mm (3 inches) with the button recessed no more than 3 mm (0.125 inches) from the front of the guard, or equivalently configured to allow for palm activation. 59 Emergency-stop protective shroud page 60 704.927.9 59 Emergency-stop protective shroud page 60 eao eao EAO’s 22.5 mm Series 04 and Series 44 E-Stop products meet international safety specification ISO 13850 and comply with EN IEC 60947-5-1 and EN IEC 60947-5-5 requirements. These new protective shrouds are made of non-breakable Lexan plastic for exceptional durability. They feature an anti-rotational pin plus the ability to lock the switch in position with a padlock after actuation. A free actuation angle of 210° can also be specified. Main ... 5 2 Features: 2 ... 5 Unbreakable Lexan construction Free actuation angle of 210° Anti-rotational pin Protection to IP 65 (when used with recommended actuator) Padlock security for Lock Out/Tag Out feature For use with part number 704.064.2, 704.066.2, 44-712, 57 Reducing ring page 61 57 Reducing ring page 61 44-713, 44-712.001, 44-713.001 2 2 Protective shroud 709.927.9 fulfills requirements of SEMI S2-93/12.4c standard EAO, the expert for Human Machine Interface Components and Systems, now offers protective shrouds for its 22.5 mm Emergency Stops (E-Stops). These shrouds protect against accidental E-Stop actuation, a feature especially important for semiconductor equipment.

Open the catalog to page 1

Series 04 / 44 - E-Stop Protective Shroud - 2

EAO - Your Expert Partner for Human Machine Interfaces EAO E-Stop and Stop Switch Accessories Protective Shrouds

Open the catalog to page 2

Series 04 / 44 - E-Stop Protective Shroud - 3

EAO - Your Expert Partner for Human Machine Interfaces Series 04, Series 44, and Series 84 Legend Plates Part Number Use with Series 04, Series 44, and Series 84 Emergency Stop switches. Series 61 Legend Plates Part Number Use with Series 61 Emergency Stop switches. www.eao.com/data sheets eaoi Shroud.11/02.22 EAO reserves the right to alter specifications without further notice.

Open the catalog to page 3