General_technical_data Series Device General Environmental conditions Swisstac switches are modularly designed. They are divided in three groups: Shock resistance (single impacts, semi-sinusoidal) 500 m/s², puls width 11 ms, as per EN IEC 60068-2-27 max. 150 m/s², pulse width 11 ms, as per EN IEC 60068-2-29 1. Front Interface Human-Switch with state detector. 2. Intermediate section Set and reset device, lamp holder, latching funktion. 3. Switching element block Up to 5 switching elements can be integrated in a switching element block. Each switch is tested fully mounted. Electrical output and service life are determinated by the switching element. Front and inter­ mediate section are designed for maximum service life of the s ­ witching element. They determine in what way the switches are protected against external influences. The type approvals relate to the complete switch. Vibration resistance (sinusoidal) max. 100 m/s² at 10 Hz … 500 Hz, as per EN IEC 60068-2-6 Approvals Approbations CSA ENEC (EN 61058) UL VDE Declaration of conformity CE Front General The front notifies the switching status, serves for activation of the switch and determines its type of protection. With the exep­ tion of the front 18 mm dia. of the illuminated pushbuttons 55 and 70 mm, all front bezel elements have activation protection. Actuator 35 mm Polybutylene terephthalate (PBT), as per UL94 V0 Lock housing Polybutylene terephthalate (PBT), as per UL94 V0 Lock cylinder Polybutylenterephthalat reinforced with carbon fibre (PBT) sealing bulb IP 65 (Silicone) Environmental conditions Front bezel Polybutylene terephthalate (PBT), as per UL94 V0 EAO reserves the right to alter specific

General_technical_data Series Intermediate section General Electrical characteristics The intermediate section integrates characteristics as setting, reset function and click-stop device. Besides all for a switch necessary parts, like front parts, switching block and lamps, are fastened at the intermediate section. Electric strength 3750 VAC, 50 Hz, 1 min., as per EN IEC 61058-1 Isolation resistance > 1012 Ω as per DIN IEC 60512-2-10 Material Environmental conditions Housing Polycarbonate (PC), as per UL94 V0 Lamp terminal Nickel silver Storage temperature -40 °C … +85 °C, as per EN IEC 60068...

Snap-action switching element Switching system Electrical characteristics Contact resistance New state with gold plated contact < 50 mQ, statically Electrical life > 10 000 cycles of operation Is equipped with double-break jump contacts. Owing to the large cleaning path, outstanding self-cleaning is possible. The multilayer contacts are designed for universal use. They are gilded with a 2 pm gold coating. Each snap-action switching element comprises a NC (normally closed contact) and a NO (normally open contact). Material Housing Polyethylene terephthalate (PETP), as per UL 94 V0 Contacts AgNi,...

Slow-make switching element Stop switch Switching system Is equipped with rigid contact link. The slow-make element opens positively and simply consists of a double-break NC. The multilayer contacts are designed for universal use and are gilded with a 2 pm gold coating. The Stop slow-make element is designed according to EN IEC 60947-5-1. Material Housing Rynite (PET), as per UL 94 V0 Contacts AgNi, 2 pm gold plated Contact carrier Brass or CuBe Electrical characteristics Rated Operational Voltage Ue 250 VAC, as per EN IEC 60947-1 Rated Insulation Voltage Ui 250 V, as per EN IEC 60947-1 Electrical...

BuzzerGeneral Electrical characteristics Device with reverse-connect protection. Operating voltage 6, 12 and 24 V AC/DC ±10 % Mechanical characteristics Power consumption approx. 13 mA Terminals Soldering terminal (also pluggable 2.8 x 0.5 mm) or PCB terminal, Acoustics Brass gold plated approx. 84 dB at 0.1 m Wire cross-section 1.0 mm2 max. Frequency (tone) approx. 2.3 kHz EAO reserves the right to alter specifications without further notice.

Emergency-stop switch foolproof Switching system Self cleaning, double-break slow-make element with four-path contacts (contact opening width 2 x 1.5 mm). The slow-make elements are constructed as per EN IEC 60947-5-1. Material Mushroom-head cap Polyamide (PA) Actuator housing Polyetherimide (PEI), self-extinguishing Switching element Polyamide (PA), Polysulfon (PSU) Material of contact Silver (Ag) Conventional free air thermal current Ith 5 A, as per EN IEC 60947-5-1 the maximum current in continuous operation and at ambient temperature must not exceed the quoted maximum values. Switch rating Switch...

General_technical_data Series Emergency-stop switch foolproof Approvals Approbations CSA UL VDE Declaration of conformity CE Keylock switch Standard lock number is B2 300 (Part No. 240-2001-00). Further standard locks are available: B2 301, B2 302, B2 303, B2 304 A further 95 locks are available in or without passepartout version on request. By order please note the Part No. and the additional marking, specimen order: Part No. 240-2001-00 B2 303. Stop switch with key to release Standard lock number is B2 390 (Part No. 240-3001-00). Further standard locks are available: B2 391, B2 392, B2 393,...