*mydirectindustry

Catalogs
EAO France
data Series 17

data Series 17

Product catalog summary

Technical Data Overview

Material: The actuator is made of brass with satin chrome or black chrome finish. The indicator, 16 mm in diameter, is made of black plastic. The polycarbonate plastic used is limited in its resistance to chemicals.

Mechanical Characteristics: Terminals are available in plug-in sizes of 2.0 x 0.5 mm or 2.8 x 0.8 mm. Indicators with tab-connection are not suitable for soldering. The recommended tightening torque is 20 Ncm.

Electrical Characteristics: The anode uses a brass plug-in connector, while the cathode uses a brass tinned plug-in connector. The operating voltage tolerance is +10%, and the operating current tolerance is ±15%.

Optical Characteristics: The document specifies various wavelengths for different colors: red (660 nm), super red (625 nm), hyper red (660 nm), orange (625 nm or 610 nm for 230 V), green (565 nm), yellow/green (570 nm or 575 nm for 230 V), yellow (590 nm), blue (475 nm), red/green (660/565 nm), and red/yellow (660/590 nm).

Environmental Conditions: The storage temperature range is -25 °C to +80 °C, while the service temperature range is -20 °C to +60 °C. The protection degree is IP 40, but can be upgraded to IP 67 as per DIN EN 60529 with the use of a supplied gasket, sealing gaps between the LED, reflector, and front plate.

Approvals: The product has UL and VDE approvals.

Catalog excerpts

General_technical_data Series Technical Data Material Environmental conditions Actuator Reflector: Brass satin chrome/black chrome for indicator 16 mm dia. in black plastic The plastic (polycarbonate) is limited resistant against chemicals Mechanical characteristics Terminals Plug-in terminal 2.0 x 0.5 mm or 2.8 x 0.8 mm The indicators with tab-connection are not qualified for soldering Protection degree front IP 40 IP 67 as per DIN EN 60529 - Gap between LED and reflector and gap between reflector and frontplate sealed to IP 67 when using the supplied gasket Electrical characteristics Polarity Anode (+) Brass plug-in connector Cathode (-) Brass tinned plug-in connector Operating voltage tolerance +10 % Operating current tolerance ±15 % Optical characteristics Wave length red super red hyper red orange green yellow/green yellow blue red/green red/yellow EAO reserves the right to alter specifications without further notice.

Open the catalog to page 1

All EAO France catalogs and technical brochures

Archived catalogs

Condensed Catalogue - Complete Catalogue
76 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list