MotorDriver ™ Linear Actuators Optics • Four travel ranges 10 mm, 13 mm, 25 mm, and 50 mm • Open loop sub-micrometer Mirrors & Beamsplitters motorized control Prisms & Polarizers MotorDriver Actuators are available with travel ranges of 10 mm, 13 mm, 25 mm, and 50 mm (0.375 inch, 0.5 inch, 1 inch, and 2 inches) to suit the various micrometer-driven stages from the MicroMech™ MiniMech™ and MacroMech™ ranges. The 10 mm travel unit is miniaturized to have a body diameter of only 12.7 mm (0.5 inch). Longer travel units are still compact for motorized drivers at 19 mm (0.75 inch) diameter. The 10 mm miniature Actuator is fitted with a spherical tip that is not interchangeable. All others feature interchangeable spherical or flat tips, both are supplied with the units. Each MotorDriver Actuator requires its own Hand Control Unit, these are described on the following pages. Dimensions and specifications for the MotorDriver Actuators range are given below. Fitting Length Fitting Dia 3.5 Jack Socket Motor Driver Body Diameter Leadscrew Pitch (mm): Motor Speed (rpm-without load): Gearhead ratio: Max. Linear Speed1 (mm/min – without load): Slowest Speed (mm/min): Resolution (µm): Max. continuous output torque (Nm x 10-3): Max. intermittent output torque (Nm x 10-3): Nominal motor voltage (VDC) Max. output power (W): Max. recommended axial load2 (kg/lb): Backlash – typical (µm): Weight (g): Breadboards & Rails Mounting Hardware MotorDriver™ Specifications Body Length Mirror & Component Mounts Manual Micro Positioners Motorized Positioners 1 Rating for intermittent operation. 2 Axial load rating is with point contact on leadscrew spindle tip. MotorDriver™ Linear Actuators Catalog Number Driver Type Spindle Extension Fitting Length Body Length DC Motor DC Motor DC Motor DC Motor DC Motor DC Motor DC Motor