To Order Call Toll Free: VGM-Series Voltage & Ground Fault Monitors VGM-Series Monitor Color touchscreen simple interface Ethernet connectivity to web interface, (4) Form C Contacts High reliability & durability Simple installation Includes mounting kit for DIN rail or wall mount Monitors 24V, 48V, 125V, & 250V batteries Alarm Contacts • VGM-100 - (1) Form C each for over voltage, under voltage, positive ground, & negative ground VM-100 - (2) Form C each for over & under voltage GFM-100 - (2) Form C each for positive & negative ground Measurement Range: Fault Resistance Limit Set: Output Contacts: Contact Rating: Maximum Switching Power: Power requirements: Noise Immunity: Time Delay to Alarm: Operating Environment: Dimensions / Weight: Voltage & Ground Fault Monitors The Eagle Eye VGM-Series is an inexpensive and simple solution for monitoring battery string voltage and battery ground faults. For monitoring of both string voltage and ground faults, the VGM-100 is available. The VM-100 is available for only monitoring string voltage, and the GFM-100 is available for monitoring of ground faults. All models read battery bus status, detect out-of-limit conditions, and provide alarm indications per user settings. The monitor’s status, U.V. and O.V. trip values, ground fault, time delay, and IP address settings are accessible on the color touchscreen. Output contacts corresponding to alarm conditions are available on each model. The VGM-Series is extremely durable and easily installed as a wall, panel, or DIN rail unit. Product Overview 60 W Powered by connected battery DC voltage VGM-Series monitor DIN rail mounting clip Backplate for wall mounting IEEE/ANSI Standard C 37.90a-1989 compliance Adjustable 1 – 999 seconds Temp: 0 – 55°C (32 – 131°F), Humidity: 0 – 95% RH 147 x 91 x 45 mm (5.77 x 3.56 x 1.77 in) / 284 g (10 oz) Voltage & Ground Fault Monitor, available for 24V, 48V, 125V, or 250V Voltage Monitor, available for 24V, 48V, 125V, or 250V Ground Fault Monitor, available for 24V, 48V, 125V, or 250V 1) Determine part number for required voltage, Ex. VGM-100-XXX would be VGM-100-125 for 125V applications.