DCPS-Series DC Power Shelfs DCPS-Shelf-9KW DC Power Shelf Common Applications: Telecom - Wireless and Outside Plant, Network, Broadband/Cable, Utilities DCPS-Shelf-9KW Product Features • Hot pluggable • Controlled, measured and reported by RS232, TCP/IP, SNMP V3 • Modular design for accommodating high power applications • 19 inch rack mount type Product Description The DCPS-Shelf-9K is a 2U 19” rack mountable integrated power system which provides up to 166 Amps at -54VDC with the RM48-3K or 111 Amps with the RM48-2K 96% efficient rectifiers.The distribution section provides the ability to terminate 2 battery strings each with its own battery disconnect circuit breaker. 10 load breaker positions are provided and are configured in two groups of 5, each with its own low voltage disconnect to allow for load shedding. Control and alarm reporting is handled by the CM-48-KA which includes a display and keypad for direct on site access of key data. Set up of all key parameters can be done locally using the RS-232 port and a custom application or via the web interface. Support for industry protocols such a Modbus or SNMP V2/V3 can be specified. General Specifications Input Specifications Output Specifications Output Voltage Output Current Adj. Range Line Regulation Load Reg. Temp. Reg. Noise Setpoint Acc. Over Current Protection Operating Temperature Storage Temp. Humidity Cooling Altitude Size (WxDxH) Standards & Approvals Operating: 0 - 90% (Non-Condensing) Storage: 0 - 90% (Non-Condensing) Status & Control Signals Communication RS232, TCP/IP, CAN Interface SNMPv3 Electromagnetic Compatibility -59 VDC over (recycle input to reset), Thermal Shutdown Ordering Information Eagle Eye Power Solutions, LLC www.eepowersolutions.com 1-877-805-3377 [email protected]