AT10.1/AT30 Microprocessor Controlled Battery Chargers

Product catalog summary

Product Overview: The AT10.1 and AT30 are microprocessor-controlled stationary float battery chargers designed with modular construction for easy setup, operation, and maintenance. They are customizable based on current and voltage requirements and come with a five-year warranty. These chargers are widely used in industries such as utilities, telecommunications, manufacturing, UPS, and transportation.

Features: Key features include a universal main control board, alarm assembly with local LEDs, AC and DC circuit breakers, high DC voltage shutdown, forced load share during parallel operation, and optional front panel control security.

Ordering Information: The AT10.1 is a single-phase charger with outputs ranging from 12 to 130 VDC and 6 to 100 ADC. The AT30 is a three-phase charger with outputs from 12 to 130 VDC and 25 to 1,000 ADC.

Technical Specifications:

VAC Input: Various voltage options are available for different current groups, including 120/208/240/480 VAC at 60Hz and 220/380/416/550-600 VAC at 50/60Hz.
Input Voltage Tolerance: +10%, -12%
Input Frequency Tolerance: ±5%
Efficiency: 85-90% typical for 130 VDC at 50-100% load
VDC Output: Nominal outputs of 12, 24, 48, or 130 VDC
Current Ratings: Group 1 ranges from 6 to 25 A, Group 2 from 30 to 100 A, and additional options up to 1,000 A
Continuous Rating: 110% rated current at maximum equalize voltage at 50 ºC
Current Limit Adjust Range: 50% to 110% rated output
Voltage Regulation: ±0.25% for line, load, and temperature variations
Electrical Noise: 32dBrnc
Surge Withstand Capability: Meets IEEE-472, ANSI C37.90a standards
Operating Environment: Ambient temperature range of -18 to 50 °C with 95% relative humidity

Contact Information: For orders, call toll-free at 1-877-805-3377 or visit www.eepowersolutions.com.

Catalog excerpts

AT10.1/AT30 Microprocessor Controlled Battery Chargers-1

To Order Call Toll Free: AT10.1 / AT30 Microprocessor Controlled Battery Chargers Product Overview Stationary float battery chargers and rectifiers are produced with a combination of advanced technology microprocessor control and performance-engineered modular construction. Chargers are easy to set-up, operate, and maintain. Chargers are customized based on current and voltage requirements. All stationary float battery chargers have a five year warranty - providing unbeatable quality and protection. Stationary float battery chargers are commonly used in the following industries: utilities & telecommunications, manufacturing, uninterrupted power systems (UPS), transportation, and many more. • • • 5 Year Product Warranty Universal main control board operates in any AT Series charger Alarm assembly with local LEDs and summary relay contact for AC Failure, DC Failure, High VDC, Low VDC, Positive(+) and Negative(-) ground fault AC input and DC output circuit breakers High DC voltage shutdown Forced load share during parallel operation Front panel controls can be disabled for security Technical Specifications Input Voltage Tolerance: Input Frequency Tolerance: Efficiency: Current Ratings: 110% rated current at maximum equalize voltage at 50 ºC (122 °F) 110% rated current at maximum equalize voltage at 50 ºC (122 °F) Battery Chargers Continuous Rating: Current Limit Adjust Range: Voltage Regulation: Electrical Noise: Surge Withstand Capability: Operating Environment: ±0.25% for line, load and temp. variations ±0.25% for line, load and temp. variations Ambient Temperature: -18 – 50 °C (0 – 122 °F) Relative Humidity: 95% Ambient Temperature: -18 – 50 °C (0 – 122 °F) Relative Humidity: 95% Description Single-Phase Battery Charger with 12, 24, 48, 130 VDC & 6 – 100 ADC Output 3-Phase Battery Charger with 12, 24, 48, 130 VDC & 25 – 1,000 ADC Output

Open the catalog to page 1