Technical Specification The UHF receiver connects to the UltraTEV Plus2 smart accessory port so you can start taking UHF measurements quickly and with ease. Features include: Simply plug the UHF receiver into the smart accessory port of the UltraTEV Plus2 to start taking UHF measurements. New UHF screens and scan modes are instantly available. Use the omnidirectional whip antenna when the source of signal to be measured can be readily determined, regardless of direction. Use the optional directional antenna to systematically scan an area to determine the location of PD sources. Ideal for outdoor air insulated substations. Technical Specification

HARDWARE MEASUREMENTS None 1x BNC antenna port 1x LEMO (UltraTEV Plus2 connection) Measurement range Tuning frequency Gain setting Accuracy UHF MEASUREMENT - WIDEBAND Measurement range DIMENSIONS Size Powered from UltraTEV Plus Supply voltage Operating temperature Resolution Measurement bandwidth EN 61326-1:2013 (Electrical equipment for measurement, control and laboratory use – EMC requirements. General requirements.) ENVIRONMENTAL MEASUREMENTS POWER SUPPLIES Power supply Switchable narrowband/ wideband EN 61000-6-2:2019 (Electromagnetic compatibility. Generic standards. Immunity standard for...