SNAPPY CMOS SENSOR FAMILY 2MP B&W and color Part of the Teledyne Imaging Group » Small, low noise global shutter CMOS pixel (2.8pm x 2.8pm) » Cost effective with ultra-small optical format (1/3”) at full HD format » Embeds unique features for the highest scanning speeds (Fast Self Exposure mode, dual-trigger modes) » Excellent SNR at low light (yields illumination system cost savings) » HDR modes for wide dynamic scenes (tolerance to light band reflection on curved reflective surfaces) » Tracking simultaneous image regions due to single and multi-ROI modes » Fast and easy to integrate with a new ultra-lightweight organic package » MIPI CSI-2 outputs for glueless embedded imaging systems » Low noise global shutter with 1,920 x 1,080 active pixels » 2.8pm pixel size » B&W and color with 12° and 0° CRA options » Above 100fps @8 bits, above 68fps @10 bits, above 55fps @12 bits (at full resolution) » Embedded features for barcode reading and other 2D scanning applications » MIPI CSI-2, 1.2Gbits lanes (selectable down to single lane) » SPI and two wire control with 4 x chip addresses for multiple sensor platforms » 3.3V, 1.8V, 1.2V power supplies » Package: 112 pins Fan-out organic

TYPICAL APPLICATIONS » Barcode scanners » Embedded vision systems » IoT edge devices » Drones/UAV » Virtual reality/augmented reality » Biometric systems From pixel performance, to integrated real-time features, to MIPI output; every aspect of the new Snappy family of CMOS sensors has been designed and optimized for cost-effective and fast scanning of end products for barcode and other 2D scanning applications. Our patented Self Fast-Exposure mode assures that the first image frame is correctly exposed to enable the fastest possible identification and decoding by the image processing system,...