DiViiNA LM1 GigE Vision Line Scan Camera Main Features • Sensor: 1024 to 4096 Pixels, 10µm or 14 µm square • Gigabit Ethernet Interface • GigE Vision and GenIcam Compliant • • • • • • • • supporting iPort Technology Compatible with third party Vision Systems Zero-loss Packet Resend Line Rate: Up to 35.7 kl/s Bit Depth: 8 Bits Dimensions: 60 x 60 x 65 mm (w, h, l) Antiblooming Cost effective and Easy to Use Fully Configurable with CommCam Software Product Description DiViiNA has been specifically designed to provide the best answer to machine vision system integrators that are under cost reduction pressure and at the same time are eager to maintain high liner CCD performance in a 1k, 2k and 4k pixel format. Offering a Gigabit Ethernet interface gives further cost reduction perspectives at the machine vision system level and therefore makes DiViiNA LM1 an outstanding choice for mid-range machine vision applications. The simple functionalities of DiViiNA LM1 coupled with a user friendly software package including complete SDK, software tools, sample applications and documentation make the integration in any system very easy. Typical Applications • Web Inspection: Wood, Paper, Metallurgy • Part inspection and sorting (Cotton, Rice, Food) • General Machine Vision Inspection Visit our website: www.e2v.com for the latest version of the datasheet e2v semiconductors

1. Standard Conformity The DiViiNA LM1 cameras have been tested using the following equipment: • A shielded power supply cable • A shelded and twisted pairs Ethernet cat 6 cable e2v recommends using the same configuration to ensure the compliance with the following standards. CE Conformity The DiViiNA cameras comply with the requirements of the EMC (European) directive 89/336/CEE (EN 50081-2, EN 61000-6-2). RoHS Conformity DiViiNA cameras comply with the requirements of the RoHS directive. GigE-based • 10/100/1000 Mb/s • 802.3, Ethernet v2.0,IPv4, IGMPv.2, UDF and ICMP (ping) • Long reach: 100...

Table 2-1. Typical Performances Note: All values in LSB are for 8-bit format.

Figure 2-1. Image Sensor Response 4 _ 1022B-IMAGE-11/10

DiViiNA LM1 3. Camera Hardware Interface 3.1 Mechanical Drawings Mechanical Drawings Reference mounting plane Mechanical reference point Reference mounting plane Reference mounting plane x Refer to table 3-1 on page 6 6 4 x 2 holes M4 (on the four sides) z = 10.18 Optical sensor plane to front face X axis

Table 3-1. Sensor Alignment

Whilst e2v has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences of any use thereof and also reserves the right to change the specification of goods without notice. e2v accepts no liability beyond that set out in its standard conditions of sale in respect of infringement of third party patents arising from the use of tubes or other devices in accordance with information contained herein.