Datasheet Omniport 40 Multifunctional Hand-Held Meter

Omniport 40 Multifunctional Hand-Held Meter The Omniport 40 is a multifunctional hand-held measuring device which accommodates E+E hand-held probes and process probes for various measurands such as temperature, humidity, moisture in oil, volume flow, dew point and CO2. It is ideal for portable on-spot measurement, as well as for process monitoring and predictive maintenance. Two M12 connections enable the simultaneous measurement of different probes. Outstanding Measurement Performance The Omniport 40 compatible hand-held probes and process probes offer the well proven E+E accuracy, outstanding...

Features M12 probe connection ■ Large selection of manual and process sensors ■ Automatic detection of different probes ■ Connection of up to 2 sensors, remote for Functions ■ On-spot measurement ■ Alarm with upper / lower thresholds and optional hysteresis ■ Dot-matrix / plain text display (backlit) ■ Selection of display layouts: ■ Large-digit single values ■ 4x AA rechargeable NiMH batteries (supplied) Enclosure ■ Protection rating IP67 ■ Shock and impact resistant

Features On Spot Measurement Various display layouts include actual measured data and a freeze of these, the deviation from a reference level or the min/max/avg values. The user configurable graph provides a quick overview of the measurement history. Data Logging In data logging mode, the Omniport 40 stores the measured data together with the time stamp in a .csv file. The file can be downloaded to a PC without any additional software. The data logger settings include the logging interval and the selection of the variables to be recorded. The data recording is started and stopped manually with...

Dimensions Values in mm (inch) Omniport 40 78 (3.1) 38 (1.5)

Technical Data Hand-Held Meter

Hand-Held Probes The hand-held probes are optimized for portable on-spot measurement. They combine the E+E outstanding measuring performance with low power requirements for long battery lifetime. The hand-held probe fits ergonomically and is connected to the hand-held meter via the cable HA010813. Hand-held probes AVP201H - Air Velocity and Temperature Hand-Held Probe for HVAC Applications AVP301H - Air Velocity and Temperature Hand-Held Probe up to 20 m/s (4 000 ft/min) AVP401H - Air Velocity and Temperature Hand-Held Probe up to 2 m/s (400 ft/min) HTP201H - Humidity and Temperature Hand-Held...

AVP201H Air Velocity and Temperature Hand-Held Probe for HVAC Applications

AVP301H Air Velocity and Temperature Hand-Held Probe up to 20 m/s (4 000 ft/min)

AVP401H Air Velocity and Temperature Hand-Held Probe up to 2 m/s (400 ft/min) Technische Daten Measuring range

HTP201H Hum idity and Temperature Hand-Held Probe for HVAC Applications Technical Data Measuring range

HTP401H Humidity and Temperature Hand-Held Probe up to 100 °C (212 °F) Technical Data Measuring range

HTP701H Humidity and Temperature Hand-Held Probe up to 180 °C (356 °F)

MOP301H Moisture-in-oil immersion hand-held probe up to 120 °C (248 °F) (with G 1/2" ISO or 1/2 NPT-slide fitting) Water activity (aw) / water content (x) Measuring range 1) Traceable to international standards, administrated by NIST, PTB, BEV... The accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation). The accuracy was calculated in accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement). Measuring range Electronics Resolution <±0.005 °C/°C (<±0.005 °F/°F) 0.1 °C (32.18...

MOP301H Moisture-in-oil immersion hand-held probe up to 120 °C (248 °F) (with G 1/2" ISO or 1/2 NPT-slide fitting)

MOP302H Short moisture-in-oil hand-held probe up to 120 °C (248 °F)

Process Probes The Omniport 40 compatible process probes open up a wide range of industrial applications beyond the scope of the hand-held probes. Depending on their type and measurand, the process probes can be used for portable on-spot measurement or can be installed in the process. The process probes can be connected to the Omniport 40 with the cable HA040908. Process probes - Air Velocity and Temperature Probe for Laminar Flow: www.epluse.com/ee680. - Modular Probe for CO2, Humidity, Temperature and Ambient Pressure: www.epluse.com/ee872. TDS401H - Dew Point Sensor down to -60 °C (-76 °F):...

TDS401H Dew Point Sensor down to -60 °C (-76 °F)

Ordering GuidePosition 1 - Omniport 40 Feature Carrying Case For Omniport 40, hand-held probes, process probes and accessories Order ExampleHand-Held Probe Feature

Accessories For further information please refer to the Accessories datasheet. 1) Suitable for MOP301H - Moisture-in-oil immersion hand-held probe up to 120 °C (248 °F)

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited your partner in sensor technology. E+E Elektronik Italia S.r.l. T +39 02 2707 86 36 [email protected] © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved WWW.6plUS6.C0m