your partner in sensor technology. ISO 9001 Calibration Services www.eplusecal.com

ISO 9001 Calibration Services for Your Measuring Instruments An ISO 9001 calibration certificate documents the comparative measurement of a measuring instrument against high-quality reference devices. The comparison is performed in accordance with internal procedures that comply with quality management system according to ISO 9001 standard and provide information on the specimen’s measuring accuracy. The reference devices are traceable to national standards, however, the calibration process is not accredited. Therefore, an ISO 9001 calibration is neither traceable nor internationally comparable....

Dew Point Air velocity sensors are calibrated in a homogeneous, reproducible airflow in wind tunnel. The reference device is traceable to international standards. Comparative measurement is performed according to internal procedures that meet the requirements of ISO 9001 quality standards. The air velocity calibration is performed in air at ambient temperature. Only air velocity sensors manufactured by E+E can be calibrated. For air velocity ISO 9001 calibration, it is not possible to calibrate the temperature and report the value on the certificate. The reference devices used for dew point (Td)...

Pressure The humidity (RH) reference device is an E+E Elektronik high-end portable humidity generator, traceable to international standards. It can accommodate humidity probes, sensors and small data loggers. Comparative measurement is performed according to internal procedures that meet the requirements of ISO 9001 quality standards. ISO 9001 humidity calibrations are performed in air at ambient temperature. On-site ISO 9001 humidity calibration service is available upon request. The calibration laboratory performs relative and differential pressure calibrations in a low-pressure range, max...

ISO 9001 Calibration ProcedureFor E+E Elektronik devices • Before requesting a quotation or shipping the device to be calibrated (the specimen) to E+E Elektronik, the calibration laboratory must evaluate the sensor to ensure that calibration can be performed. For example, EE260, EE310-T1 (wall mount) are not compatible with the reference devices used for ISO 9001 calibration. • The calibration order must specify the calibration points along with the desired accuracy (within which no corrective actions are taken). • Upon receipt, the specimen undergoes a quick functional check to verify that the...

E+E Elektronik - Your Partner in Sensor Technology For non E+E Elektronik devices E+E Elektronik GmbH, with headquarters in Engerwitzdorf, Austria, has been established in 1979 and is part of Dr. Johannes Heidenhain GmbH group. • Before requesting a quotation or shipping the device to be calibrated (the specimen) to E+E Elektronik, the calibration laboratory must evaluate the sensor to ensure that calibration can be performed (e.g., if the probe diameter or sensor size/length is not compatible with the reference devices used for ISO 9001 calibration). • If the specimen is equipped with a non-standard...

4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com Modification rights reserved | Art. Nr. 485106 your partner in sensor technology.