Catalogs >
E+E ELEKTRONIK >
humidity_calib

humidity_calib
1Pages

Catalog excerpts

Humidity Calibration Kit Calibration chamber The E+E Humidity Calibration Kit offers a cost effective method for calibrating humidity measuring devices with sensing probes 0 10-12 mm (0.4-0.47 inch). It is very easy to use and it does not require highly qualified technical staff. The kit consists of a humidity calibration chamber and a choice of E+E Humidity Standard Sets. Humidity Standards: The E+E Humidity Standards are non-saturated salt solutions available in sets of five or fifty single-use ampoules, which may be stored an indefinite time. The salt solutions are non-harmful, handling them does not require specific safety measures. Safety data sheet is available upon request. Each E+E Humidity Standard Set is supplied with a traceable calibration certificate, issued by the Austrian National Metrology Institute (NMI). Accuracy of the E+E Humidity Standards For calibration procedure using the Humidity Calibration Kit please see the user guide at www.epluse.com. Humidity Standards order code Humidity Standards order code 5 ampoules 0 % RH + 5 textile pads 5 ampoules 5 % RH + 5 textile pads 5 ampoules 10 % RH + 5 textile pads 5 ampoules 20 % RH + 5 textile pads 5 ampoules 35 % RH + 5 textile pads 5 ampoules 50 % RH + 5 textile pads 5 ampoules 65 % RH + 5 textile pads 5 ampoules 80 % RH + 5 textile pads 5 ampoules 95 % RH + 5 textile pads Calibration Chamber for sensor probes 0 10...12 mm (0.4...0.47”) HA010401

Open the catalog to page 1