your partner in sensor technology. High-End Humidity and Temperature Sensor for Industrial Applications

EE310 High-End Humidity and Temperature Sensor for Industrial Applications The EE310 is optimized for best reliability in industrial applications from -80 °C (-112 °F) up to 180 °C (356 °F) and 20 bar (290 psi). In addition to highly accurate measurement of the relative humidity (RH) and temperature (T), the device calculates all other humidity related parameters. Measurement Performance The EE310 employs high-end E+E humidity sensing elements manufactured in state-of-the-art thin film technology, which enable the outstanding measurement accuracy. Long-Term Stability The E+E proprietary coating...

Features Enclosure ■ IP65 / NEMA 4X protection rating ■ Polycarbonate or stainless steel ■ Easy mounting and service 3.5" TFT colour display ■ Shows up to 4 measurands simultaneously ■ Layout and measurands freely selectable ■ Data logger for 20 000 values per measurand ■ Logged data shown graphically ■ Intuitive device setup with push buttons ■ Configuration, adjustment and firmware update ■ Download logged data Outputs ■ 2 analogue outputs current / voltage ■ Error indication according to NAMUR ■ Configurable via display or software ■ Working range from -80 °C (-112 °F) ■ Protective coating...

Features Protective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the sensing elements, their leads and soldering points. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, off-shore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface or on the electrical connections. Dimensions Values in mm (inch) Enclosure Polycarbonate Stainless steel Types T1:...

Technical Data Measurands 1) Defined against E+E calibration reference. 2) Defined at 23 °C with an enhancement factor k=2, corresponding to a confidence level of 95 %. Measuring range T10, pressure-tight probe T24, T only remote probe Temperature dependence of electronics, typ. 1) Defined against E+E calibration reference. 2) Defined at 23 °C with an enhancement factor of k=2, corresponding to a confidence level of 95 %. Calculated Quantities

Technical Data Outputs 1) Degree of pollution 2, overvoltage category II, altitude up to 3000 m (9843 ft).

Ordering Guide Feature 1) Standard = 2 x M16 cable glands, except for AM3 option: 2 plugs for power supply and outputs 2) Only with polycarbonate enclosure 3) Combination of Ethernet module (J4) and integrated power supply (AM3) is not possible 4) With electrical connection standard only (no other plug options possible) 5) Both analogue outputs shall be either voltage or current

Measurand CodeFor Output 1 and 2 in the Ordering Guide Measurand PLEASE NOTE No mix of SI/US units allowed.

Accessories For further information please refer to the Accessories datasheet. 1) For polycarbonate enclosure only. Two pieces are necessary for each EE310.

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_EE310 | Version v2.9 | 06-2024 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.