your partner in sensor technology. Heated Humidity and Temperature Probe for Meteorological Applications

EE260 Heated Humidity and Temperature Probe for Meteorological Applications The EE260 probe is optimized for accurate and reliable relative humidity (RH) and temperature (T) measurement in meteorology and demanding outdoor applications. Innovative, Compact Design The design of the EE260 integrates a heated humidity sensing head and an additional T sensing element into one single compact probe. The device is thus compatible with rotation symmetric radiation shields. Measurement Performance The dual heating system prevents condensation on the RH sensing element, on the probe head and on the filter...

Features Measurands ■ Relative humidity (RH) ■ Frost point temperature (Tf) ■ Water vapour partial pressure (e) Electronics ■ Fully encapsulated ■ RS485 interface with Modbus RTU protocol ■ User configurable and adjustable RH and T sensing element ■ Heated ■ PTFE membrane filter on stainless steel body ■ Flexible thermoplastic elastomer ■ M12x1 connector, 8 poles, stainless steel Inspection certificate According to DIN EN 10204-3.1

FeaturesProtective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the sensing elements, their leads and soldering points. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, off-shore applications). Additionally, it improves the sensors' long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface or on the electrical connections. Technical DataMeasurands Relative humidity (RH) 1) Traceable to international standards,...

Technical Data Measurands Measuring range Freely selectable and scalable outputs Digital Digital Interface 1) The EE260 simultaneously features two analogue voltage outputs and the RS485 interface. 2) Find more details about communication setting in the User Manual and the Modbus Application Note at www.epluse.com/ee260. 1) Compliance with EN 61000-4-3 and EN 61000-4-6: Electromagnetic interferencees may cause additional deviations <2 %RH.

Ordering Guide Feature 1) Applies to both outputs

1) Both accessories are necessary for configuration

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_EE260 | Version v1.7 | 07-2024 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.