Datasheet Humidity and Temperature Sensor with Interchangeable Probes

EE220 Humidity and Temperature Sensor with Interchangeable Probes The innovative, modular EE220 humidity (RH) and temperature (T) sensor consists of a basic unit and various pluggable, interchangeable probes. Versatility The basic unit can accommodate one combined EE07 RH and T probe or two separate EE07 probes, one for RH and one for T. The EE07 probes are available in plastic or in stainless steel enclosure and can be plugged onto the basic unit either directly or with M12 extension cables up to 10 m (32.8 ft) long. An optional kit facilitates the mounting of the probes in a duct. The EE220...

FeaturesOutputs, Calibration and Adjustment ■ 2 analogue voltage or current outputs 1- or 2-point adjustment for RH and T, via push buttons on the electronics board Easy loop calibration with separate probes for RH and T ■ Polycarbonate or aluminium die-cast ■ IP65 / NEMA 4(X) protection rating ■ Easy mounting and cleaning ■ Versatile connection options Interchangeable probes ■ Outstanding accuracy and long term stability ■ Wide temperature working range ■ Combined and separate probes for RH and T available ■ Stainless steel or polycarbonate enclosure ■ Reference probes for functional check www.epluse.com...

Dimensions Values in mm (inch) Enclosure Aluminium die-cast EE220 with two separate probes for RH + T EE220 with one remote RH + T probe EE220 with two separate remote probes for RH + T Cable length Ordering code *) L = Filter length see Datasheet „Accessories“

Dimensions Values in mm (inch) Duct mounting kit HA010209 60 (2.36) 200 (7.87) Field Loop Calibration A loop calibration or adjustment in the field, as required by the FDA (Food and Drugs Administration) regulated industries is easily possible for the EE220 with two separate probes. Using extension cables, the EE07 probes can be dropped into calibrators without dismounting the EE220 basic unit. The illustration below shows the EE07 RH probe placed in the Humor 20 high end portable humidity calibrator and the EE07 T probe in a dry block calibrator. Temperature calibrator v1.7 / Modification rights...

Technical data and ordering guide see EE07 data sheet A functional and accuracy check of the EE220 basic unit can be performed using reference probes instead of the regular EE07 probes. These are certified by individual test reports and available for two pairs of fixed RH and T values: www.epluse.com v1.7 / Modification rights reserved | 6

www.epluse.com v1.7 / Modification rights reserved | 7

Ordering Guide The EE220 basic unit does not include the sensing probes, which are to be ordered separately. The order shall include three positions: Position 1: EE220 Basic Unit v1.7 / Modification rights reserved | 8

Order Example Position 1 - Basic Unit: EE220-HS3A3NP1E4 v1.7 / Modification rights reserved | 9

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Sensor Technology (Shanghai) Co., Ltd. E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_EE220 | Version v1.7 | 01-2024 Modification rights reserved your partner in sensor technology.