your partner in sensor technology. Datasheet Modular Humidity and Temperature Sensor

EE212 Modular Humidity / Temperature Sensor The EE212 humidity (RH) and temperature (T) sensor with interchangeable sensing module is optimized for demanding climate control applications in most various industries. Versatility The EE212 is available for wall or duct mount as well as an outdoor version. It features two analogue outputs as well as RS485 interface with Modbus RTU protocol and optional graphic display. Besides the accurate RH and T measurement, the sensor calculates various humidity related parameters such as dew point temperature, absolute humidity and mixing ratio. Outstanding...

Features Knockout for 'A" conduit fitting (US) ■ Protection against contamination and condensation ■ Minimal installation costs ■ Type T13 compatible with radiation shield HA010501 ■ Configurable display layout ■ Measurands freely selectable Bayonet Screws ■ Open/close with a % rotation Smooth cover surface ■ No accumulation of dust in protruding edges ■ Optimum protection against mechanical damage during installation EE212M calibrated sensing module ■ State-of-the-art E+E RH / T sensing element with proprietary coating and sealed solder pads ■ Patented sensor technology ■ Quick exchange with...

Features Protective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the active surface of the sensing element. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, offshore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface. Dimensions Values in mm / inch Type T1 ±0.3 Stainless steel Metal grid

Dimensions Values in mm / inch Mounting flange in the scope of supply for type T2 Radiation shield HA010501 for type T13 needs to be ordered separately www.epluse.com v1.8 / All rights reserved | 5

Technical Data Measurands 1) Traceable to international standards, administrated by NIST, PTB, BEV,... The accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation). The accuracy was calculated in accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement). For Type T13: @ 24 V DC and RL=250 Q for A6 Versions Measuring range Calculated quantities 1) Td accuracy according to RH and T uncertainties, please use the E+E Humidity Caclulator for details.

Technical Data Outputs Two freely selectable and scalable outputs 1) For display operation with EE212-xA6 (4 - 20 mA, 2-wire) both outputs must be connected.

Ordering Guide Feature 1) Factory setup: the display shows the measurands selected for output 1 and output 2 for analogue versions, RH and T for digital versions. 4) Modbus Map and setup instructions: See User Guide and Modbus Application Note at www.epluse.com/ee212.

Measurand Code For Output 1 and 2 in the Ordering Guide

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_EE212 | Version v1.8 | 11-2024 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.