your partner in sensor technology. DatasheetEE211 Humidity and Temperature Sensor for Continuous High Humidity

EE211 Humidity and Temperature Sensor for Continuous High Humidity The EE211 is dedicated for accurate and long term stable measurement under continuous high humidity (>85 %RH) and condensing conditions in demanding climate control. It features a heated humidity (RH), and an interchangeable temperature (T) probe. Reliability Excellent performance of EE211 even in condensing polluted, aggressive environment is ensured by the combination of IP65 / NEMA 4X enclosure, encapsulated electronics inside the humidity probe and a long-term stable E+E sensing element with E+E proprietary coating. Versatility...

Features External mounting holes ▪ Mounting with closed cover ▪ Electronics protected against construction site pollution Display ▪ Shows up to 3 measurands ▪ Backlight ▪ Easy and fast mounting Bayonet screws ▪ Open / close with a ¼ rotation Electronics on the bottom of the PCB ▪ Optimum protection against mechanical damage during installation Smooth cover surface Cast electronics Separate T probe EE07-M3HS2 E+E humidity sensing element ▪ Intelligent, interchangeable T probe ▪ Protected by E+E proprietary coating ▪ Remote connection possible ▪ Sealed solder pads ▪ Suitable for dry block calibrator...

Features Protective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the active surface of the sensing element. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, offshore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface. Operation Principle The humidity probe is continuously heated for avoiding the effects of condensation and high humidity on the...

Technical Data Measurands

Technical Data General

Ordering Guide Feature 1) Factory setting: Baud rate 9600, parity even, 1 stop bit. Other factory settings available upon request. Baud rate choice: 9 600 / 19 200 / 38 400 / 57 600. Modbus Map and communication setting: See User Guide and Modbus Application Note at www.epluse.com/ee211. 2) Factory setting: For analogue output versions the display shows the measurands selected for output 1 and output 2. For digital output versions the display shows RH and T.

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_EE211 | Version v1.6 | 11-2024 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.