EE210
5Pages

Humidity and Temperature Transmitter for Demanding Climate Control Applications The EE210 transmitter by E+E Elektronik meets the highest requirements in demanding climate control applications. Besides highly accurate measurement of relative humidity and temperature, EE210 calculates dew point temperature, absolute humidity and mixing ratio. EE210 is available as wall or duct mounted as well as with remote probe. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation. All measured and calculated values are available on the BACnet MS/TP or Modbus RTU interface; two of the measured and calculated values are available on the analogue voltage or current outputs, while up to three values can be shown simultaneously on the optional display. Excellent performance of EE210 in polluted, aggressive environment is EE210 ensured by the combination of completely protective encapsulated measurement electronics inside the sensing probe and the long-term stable HCT01 sensor with E+E proprietary coating. With an optional conguration kit the user can set the Modbus interface parameters, the output scaling and perform one or two point adjustment for humidity and temperature. Features Appropriate for US mounting requirements » Knockout for ½” conduit tting External mounting holes » Mounting with closed cover » Electronics protected against construction site pollution » Easy and fast mounting Display » Selectable display layout » Measurands freely selectable Smooth cover surface » No accumulation of dust in protruding edges Electronics on the underside of the PCB » Optimum protection against mechanical damage during installation Bayonet Screws » Open/closed with a ¼ rotation Cast Electronics Watertight cable outlet » Mechanical protection » Condensation-resistant E+E Humidity sensor HCT01 » » » » Long-term stability Protected RH sensor surface Protected solder pads Tested according to automotive standard AEC-Q200 agriculture stables, incubators, hatchers green houses storage rooms, cooling chambers indoor pools demanding climate control 4 BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI. v2.0 / Modification rights reserved

Technical Data Measured Values Relative Humidity (RH) Sensor E+E Sensor HCT01-00D Working range 0...100% RH RH accuracy (incl. hysteresis, non-linearity and repeatability) Wall & duct version: -15...40°C (5...104°F) ≤90% RH ±(1.3 + 0.003*measured value) % RH -15...40°C (5...104°F) >90% RH ± 2.3% RH -40...60°C (0...140°F) ±(1.5 + 0.015*measured value) % RH Remote probe version at 20°C (68°F) Temperature (T) Sensor T-accuracy ±2.5% RH Pt1000 (tolerance class B, DIN EN 60751) integrated in HCT01 wall & duct remote probe Analog output (RH: 0...100%; T: see ordering guide) Digital output Power...

L...according to ordering guide Output: Modbus RTU or BACnet MS/TP v2.0 / Modification rights reserved

Ordering Guide MODEL (3) standard (P) wall mount (x) duct mount remote probe (D) membrane (B) (x) stainless steel sintered (D) for type C (x) EE210Analogue outputs setup OUTPUT 1 relative humidity5) temperature dew point temperature frost point temperature water vapour partial pressure5) mixing ratio5) absolute humidity5) specific enthalpy5) relative humidity5) temperature dew point temperature frost point temperature water vapour partial pressure5) mixing ratio5) absolute humidity5) specific enthalpy5) Digital output setup7) PROTOCOL Modbus RTU7) BACnet MS/TP8) PARITY (A) odd (B) even (C)...

Scope of supply EE210 WALL MOUNT (TYP A): • • • • EE210 Transmitter according Ordering Guide 1 x Cable gland Mounting kit Inspection certicate according to DIN EN10204 - 3.1 EE210 Transmitter according Ordering Guide 1 x Cable gland Mounting ange Mounting kit Inspection certicate according to DIN EN10204 - 3.1 EE210 WITH REMOTE PROBE (TYP C): • • • • EE210 Transmitter according Ordering Guide, without probe 2 x Cable gland Mounting kit Inspection certicate according to DIN EN10204 - 3.1 EE210-P according Ordering Guide Mounting ange Inspection certicate according to DIN EN10204 - 3.1 !!...