EE160
4Pages

Humidity and Temperature Transmitter for HVAC Applications Specially designed for HVAC, the EE160 sensor by E+E Elektronik is a costeffective, highly accurate and reliable solution for measuring relative air humidity and temperature. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring awless operation. The EE160 employs the new humidity/temperature E+E sensor element HCT01 with excellent long term stability and resistance against pollutants. In combination with a long calibration experience, the EE160 provides a measurement accuracy of ±2.5%RH and is available for wall or duct-mounted with current, voltage BACnet MS/TP or Modbus RTU output. A congurator makes it possible to freely select the scaling of the temperature output and congure the Modbus parameters. The congurator software, which is free of charge, allows additionally for an on-site adjustment of the humidity and temperature. Appropriate for US mounting requirements » Knockout for ½” conduit tting External mounting holes » Mounting with closed cover » Electronics protected against construction site pollution » Easy and fast mounting Electronics on the underside of the PCB » Optimum protection against mechanical damage during installation Bayonet Screws » Open/closed with a ¼ rotation Cast Electronics » Mechanical protection » Condensation-resistant E+E Humidity sensor HCT01 » Long-term stability » Protected RH sensor surface » Protected solder pads » Tested according to automotive standard AEC-Q200 BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test products for compliance with ASHRAE standards. Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI). BTL is a registered trademark of BI. v1.9 / Modification rights reserved

Technical data Measured values Relative Humidity Sensor Working range Accuracy at 20°C Temperature dependency Temperature Sensor T-Accuracy at 20°C E+E Sensor HCT01-00D 10...95% RH ±2.5% RH typ. ±0.03% RH/°C Pt1000 (tolerance class B, DIN EN 60751) ±0.3°C Analog output (RH: 0...100%; T: see ordering guide) Digital output Passiver T-sensor 4-wire Power supply for 0 - 10 V / RS485 for 4 - 20 mA Current consumption Analog 0-10 V -1 mA < IL < 1 mA or 4-20 mA (two-wire) RL < 500 Ohm RS485 (BACnet MS/TP or Modbus RTU) max. 32 EE160 in one bus see ordering guide 15 - 35V DC or 24V AC ±20% 10V + RL...

Ordering Guide Hardware conguration MODEL (A) polycarbonate (P) wall mount (C) duct mount (E) (J) (x) EE160Analogue outputs setup OUTPUT SCALING Digital output setup PROTOCOL Modbus RTU4) BACnet MS/TP5) 1) A combination of analog and digital version is not possible 2) Analogue version only 3) Other scaling upon request 4) Modbus Map and setup instructions: See User Guide and Modbus Application Note at www.epluse.com/EE160 5) Product Implementation conformance Statement (PICS) availbale at www.epluse.com/EE160 6) Only for BACnet Scope of supply EE160 WALL MOUNT (TYPE A): EE160 WALL MOUNT...

YOUR PARTNER IN SENSOR TECHNOLOGY J^^lM Order example_ Analog output Model: humidity Housing: polycarbonate Type: wall mounting Filter: membrane filter temperature transmitter Output scaling: Digital output Digital output: humidity + temperature transmitter duct mounting membrane filter Product configuration adapter Product configuration software Power supply adapter see data sheet EE-PCA EE-PCS (free download: www.epluse.com/EE160) V03 (see data sheet Accessories) v1.9 / Modification rights reserved