EE08
2Pages

Catalog excerpts

High-Precision Miniature Humidity / Temperature Transmitter Accurate humidity / temperature measurement over a wide working range, fitted in a small-sized housing and high flexibility have been the main goals for the development of the EE08 series. Low power consumption and short start-up time support efficient energy management for battery operated systems. with cable For this application an additional version (V10) with supply voltage 4.5-15V DC has been developed. Calibration data and other relevant functions like linearization or temperature compensation are stored in the probe. This feature, together with the optional connector, allows for easy replacement of the probe without a need for re-adjustment with connector of the reading device (interchangeability). The humidity and temperature measurement are available as analogue outputs (0-1/2.5/5V) and as a digital interface (E2-interface). Easy implementation and data processing is warranted. Humidity and temperature reading can be re-adjusted using the calibration software; available as an accessory. The configuration equipment allows humidity and temperature adjustment of the sensor. Typical Applications meteorology / weather stations humidity / temperature data logging incubators fermentation chambers green houses snow machines dry storage facilities Technical Data small dimensions wide working range, high accuracy traceable calibration customer adjustment possible interchangeable in seconds low power consumption / short start-up time analogue outputs / digital interface Measuring values Relative Humidity Sensor HC101 Working range 0...100% RH Digital output (2 wire) output value: 0.00...100.00% RH Analogue output 0...100% RH 0-1/2.5/5/10V -0.2mA < I < 0.2mA Accuracy at 20°C (68°F) and 12V DC ±2% RH (0...90% RH) ±3% RH (90...100% RH) Traceable to intern. standards, administrated by NIST, PTB, BEV... Temperature dependence typ. 0.03% RH/°C (typ. 0.02% RH/°F) 1) Sensor Digital output (2 wire) Analogue output Accuracy at 12/24V DC Pt 1000 (DIN A) output value: -40.00...+80.00°C (-40...176°F) 0-1/2.5/5/10V -0.2mA < I < 0.2mA Supply voltage Current consumption Digital interface Housing Sensor protection Electromagnetic compatibility Temperature ranges output 0-1V / 0-2.5V 4.5-15V DC or 7-30V DC output 0-5V 7-30V DC output 0-10V 12-30V DC typ. < 1.3mA E2-interface level = 3.3V / ±0.1V polycarbonate / IP65 metal grid filter EN61326-1 EN61326-2-3 Industrial Environment working temperature: -40...80°C (-40...176°F) storage temperature: -40...80°C (-40...176°F) 1) refer to the working range of the humidtiy sensor HC101 2) serial protocol refer to www.epluse.com v1.8 / Modification rights reserved

Open the catalog to page 1

Dimensions (mm) EE08 with cable (Type E) 61 EE08 with connector (Type D) 83 (3.3”) Connection Diagram Type E: T-passive T-passive GND T-out RH-out SCL E2SDA inferface +UB Temp. active white (not connected) blue (not connected) pink grey yellow green brown red Temp. passive, 4-wire white, black blue, violet pink grey (not connected) yellow green brown red Ordering Guide HOUSING humidity active / temperature active (FT) 0 humidity active / temperature passive (FP) 0 00- (passive, 4-wire) (1) 4.5 - 15V DC (V10) Pt 100 DIN A (A) with connector (D) (7) 7 - 30V DC (V11) Pt 1000 DIN A (C) with...

Open the catalog to page 2