EE07
3Pages

Catalog excerpts

Interchangeable Humidity / Temperature Probes with Digital Output EE07 is ideal for demanding climate control and OEM applications and features the well-proven E+E HC105 humidity (RH) sensor. It is available in polycarbonate or metal enclosure, as well as for temperature (T) measurement only. The wide T working range, the T compensation and the choice of filter caps make EE07 appropriate for both indoor and outdoor use. Due to the excellent RH and T accuracy, the probe can be employed with the optional radiation shield even in meteorology. The E+E proprietary coating protects the humidity sensor against corrosion and dirt, which leads to best long term stability even in harsh environment. The measured values are available on the serial E2 interface. The M12 connector allows for EE07 replacement within seconds. The user can perform the RH and T adjustment of the probe with the optional configuration kit. Typical Applications Demanding climate control Outdoor and meteorology OEM applications Outstanding RH and T Accuracy Excellent long term stability Digital output Pluggable and interchangeable Technical Data Measured values Relative Humidity Sensor element Digital output (2 wire E2 interface)1) Working range Accuracy2) incl. hysteresis and nonlinearity Temperature dependence Sensor element 1) Digital output (2 wire) Accuracy E+E HC105 output value: 0.00...100.00 % RH 0...100 % RH ±2 % RH (0...90 % RH) RH (90...100 % RH) ±3 % Traceable to intern. standards, administrated by NIST, PTB, BEV... % RH < (0.025 + 0.0003 x RH) [ °C ] Pt1000 (tolerance class A, DIN EN 60751) output value: -40.00...+80.00 °C (-40...176 °F) ∆°C Supply voltage (Class III) Current consumption Voltage digital interface Housing Electromagnetic compatibility3) Temperature range Max. cable length4) 3.8 V DC - 5.5 V DC < 1.5 mA max. 3.5 V polycarbonate or stainless steel / IP65 EN 61326-1 EN 61326-2-3 working temperature: -40...80 °C (-40...176 °F) storage temperature: -40...60 °C (-40...140 °F) 30 m (98.4 ft) For details see support literature at www.epluse.com/EE07. Traceable to intern. standards, administrated by NIST, PTB, BEV,... The accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation). The accuracy was calculated in accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement). No protection against surge 4) Depends on the bus frequency

Open the catalog to page 1

Stainless steel grid Connection Diagram M12x1 flange coupling with 50 mm (2“) flying leads (HA010705): E+E Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the sensing elements. The coating extends substantially the lifetime and the measurement performance of EE07 in corrosive environment. Additionally, it improves relevantly the long term stability in dusty, dirty or oily applications by preventing stray impedances caused by deposits on the active sensor surface. Ordering Guide Humidity & Temperature Probes: HOUSING (FT) membrane PTFE metal grid H2O21)...

Open the catalog to page 2

Scope of Supply - EE07 probe according to ordering guide - Inspection certificate according to DIN EN10204 - 3.1 Accessories (See data sheet “Accessories”) - M12x1 flange coupling with 50 mm (2“) flying leads HA010705 - Connecting cable M12x1 - flying leads (1.5 m (59.1“) / 5 m (196.9“) / 10 m (393.7“)) HA010819/20/21 - Filter caps HA0101xx - Radiation shield with cable gland (M20x1.5) HA010502 - Configuration adapter see data sheet EE-PCA v2.4 / Modification rights reser

Open the catalog to page 3