EE07
2Pages

Catalog excerpts

Interchangeable Humidity / Temperature Probes for OEM Applications customer specific modifications possible The compact EE07 humidity and/or temperature probe is based on a new electronic concept in combination with the miniaturized SMD humidity sensor element HC105 series. A wide humidity and/or temperature working range, compact dimensions of the polycarbonate or metal housing and appropriate filters allow for the use in a large variety of applications. Calibration data and other measurement relevant functions (e.g. linearization or temperature compensation) are stored in the electronics, integrated in the probe. In combination with the M12 connector, replacement in seconds without readjustment of the evaluation electronics is guaranteed. The digital output signal allows for easy processing of the measurement results and cost efficient interfacing to customers electronics. The configuration equipment allows humidity and temperature adjustment of the sensor. Polycarbonate Housing Metal Housing Metal housing Typical Applications digital output interchangeable easy to install compact size highest accuracy traceable calibration easy interfacing to microcontroller humidifiers and dehumidifiers meteorological applications climate and ventilation control snowguns OEM applications Technical Data Measuring values Relative Humidity Sensor element Digital output (2 wire) Working range Accuracy incl. hysteresis and nonlinearity HC105 output value: 0.00...100.00% RH 0...100% RH ±2% RH (0...90% RH) ±3% RH (90...100% RH) Traceable to intern. standards, administrated by NIST, PTB, BEV... % RH < (0.025 + 0.0003 x RH) [ °C ] Temperature dependence Sensor element Digital output (2 wire) Accuracy Pt1000 (tolerance class A, DIN EN 60751) output value: -40.00...+80.00°C (-40...176°F) Supply voltage Current consumption Housing Sensor protection Electromagnetic compatibility Temperature range max. cable length 1) serial protocol refer to www.epluse.com 3) EE07 is not protected against surge 3.8V DC - 5.5V DC < 1.5mA polycarbonate or stainless steel / IP65 membrane filter, PTFE filter, metal grid filter (polycarbonate), metal grid filter (stainless steel) EN 61326-1 EN 61326-2-3 working temperature: -40...80°C (-40...176°F) storage temperature: -40...60°C (-40...140°F) 30m (98.4ft) 2) refer to the working range of the humidtiy sensor HC105 4) dependent on selected Bus frequency v2.2 / Modification rights reserved

Open the catalog to page 1

Housing Dimensions (mm) Temperature Probes: Humidity & Temperature Probes: Connection Diagram M12x1 flange coupling with 50mm (2“) litz wire (HA010705): Ordering Guide Humidity & Temperature Probes: HOUSING membrane filte PTFE filter metal grid filter (polycarbonate) metal grid filter (stainless steel) H2O2 filter without with EE071) The metal housing is only available with metal grid lter (stainless steel) (9) Temperature Probes: Polycarbonate housing Metal housing Order Example EE07-PFT6 Polycarbonate housing Humidity and temperature Metal grid filter (polycarbonate) EE07-MT Metal housing...

Open the catalog to page 2