EE060
2Pages

Catalog excerpts

EE060 EE060 probes are the ideal solution for cost-effective, highly accurate and reliable measurement of relative humidity (RH) and temperature (T). Humidity / Temperature Probe with Voltage Output Excellent protection against external influences is ensured by the combination of completely encapsulated electronics and the long-term stable HCT01 sensing element with E+E proprietary protective coating. EE060 is available with an integrated cable or a threaded connector, with wide temperature and supply voltage ranges and dual 0 - 1 V, 0 - 5 V or 0 - 10 V analogue outputs, for humidity and temperature. The result of the wide temperature range and the flexible supply voltage in combination with the excellent long-term stability is a versatile applicable probe. Protective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the active surface of the HCT01 sensing element. The coating substantially extends the life-time and the measurement performance of the E+E sensor in corrosive environment. Additionally, it improves the sensor’s long term stability in dusty, dirty or oily applications by preventing stray impedances caused by deposits on the active sensor surface. Sensor coating Sealed solder pads Encapsulated electronics Typical Applications Stables, incubators, hatchers Green houses Humidifiers and dehumidifiers Monitoring of storage rooms HVAC applications Excellent price/performance ratio Very good long term stability Easy installation Well protected against dust and dirt Technical Data Measurands Relative humidity Working range Analogue output 0...100 % RH Accuracy at 24 V DC, 20 °C (68 °F)1) Analogue output 1) raceable to international standards, administrated by NIST, PTB, BEV,... T The accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation). The accuracy was calculated in accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement).

Open the catalog to page 1

Supply voltage Current consumption, typ. Electrical connection Enclosure material Protection class Electromagnetic compatibility2) Working temperature range Storage temperature range A1: 3.6 - 30 V DC / A2: 10 - 30 V DC / A3: 15 - 30 V DC 1.5 mA Cable PVC (Ø 4.3 mm (0.17"), 4 x 0.25 mm²) Connector plug M12 x 1 (4 poles) Polycarbonate IP65 EN 61326-1 EN 61326-2-3 -40...+80 °C (-40...176 °F) -40...+80 °C (-40...176 °F) 2) Analogue output 0 - 1 V is not protected against surge! Dimensions Values in mm (inch) Cable version (Type E8) Connector version (Type E9) Hardware Configuration Humidity...

Open the catalog to page 2