your partner in sensor technology. DatasheetEE160 Humidity and Temperature Sensor for Building Automation

EE160 Humidity and Temperature Sensor for Building Automation The EE160 is optimized for cost effective, accurate measurement of relative humidity (RH) and temperature (T) in building automation. Reliable Best long-term stability even in polluted or aggressive environment is ensured by the encapsulated measurement electronics inside the probe and E+E proprietary coating of the sensing element. Versatile The measured data is available on two voltage or current (2-wire) outputs, or on the RS485 interface with Modbus RTU protocol. Additionally, the EE160 features a passive T output and an optional...

Features Display Appropriate for US mounting requirements ▪ Two display lines for RH and T values ▪ Knockout for ½" conduit fitting ▪ Unit selection °C / °F according to the order code ▪ Threshold setting for T using PCS10 External mounting holes ▪ Easy and fast mounting with closed cover ▪ Electronics protected against construction site pollution Smooth cover surface ▪ No dust accumulation in protruding edges Enclosure Electronics on the backside of the board ▪ Optimum protection against mechanical damage during installation Bayonet screws ▪ Open/close with a ¼ rotation Encapsulated electronics...

Features Protective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the active surface of the sensing element. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, offshore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface. Sensor coating Encapsulated electronics Sealed solder pads Sensing head with sensor coating and underfiller Dimensions Values in...

Technical Data Measurands

Technical Data General 1) For display operation with EE160-MxA6 (4 - 20 mA, 2-wire) both outputs must be connected.

Ordering Guide Feature 1) With Model M8 only / T sensor. Details see www.epluse.com/R-T Characteristics. 3) Modbus map and configuration guide see user manual or Modbus application note at www.epluse.com/ee160

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_EE160 | Version v2.11 | 10-2024 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.