your partner in sensor technology. DatasheetEE072 Humidity and Temperature Probe with Digital Interface

EE072 Humidity and Temperature Probe with Digital Interface The EE072 probe meets the highest requirements of demanding process and climate control applications such as in agriculture, life stock, food, pharma, clean rooms, outdoor, artificial snow machines and transportation. Besides the measurement of relative humidity (RH) and temperature (T) the EE072 calculates all other humidity related parameters. Measurement Performance The high-end E+E humidity sensing element manufactured in state-of-the-art thin film technology stands for outstanding measurement accuracy. Long-Term Stability The E+E...

FeaturesMeasurement performance High RH / T accuracy Temperature compensation Calculated variables - Water vapour partial pressure (e) Configurable pressure compensation parameter ■ Stainless steel or polycarbonate enclosure ■ Sealed solder pads ■ Tested according to automotive standard AEC-Q200 ■ Free configuration software www.epluse.com v2.9 / All rights reserved | 3

Features Protective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the active surface of the sensing element. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, offshore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface. Sensor coating Encapsulated electronics Sealed solder pads Sensing head with sensor coating and underfiller E+E Modular Sensor...

Features Accredited Traceable Calibration Certificate Internationally recognised certificates for the calibration of measuring instruments from accredited laboratories document the traceability of the measurements to the International System of Units (SI). The E+E Elektronik calibration laboratory offers two levels of traceable calibrations. ■ As a Designated Institute (DI) of the Republic of Austria, the E+E calibration laboratory maintains Austria's national measurement standards for humidity, dew point temperature, air velocity and CO2. This authorises the E+E calibration laboratory to issue...

Technical Data Measurands 1) Defined against E+E calibration reference. For Modbus, the accuracy is defined at a 24 V DC supply, baud rate 9 600, without termination resistor, a polling interval >1 s and a flow velocity >0.2 m/s (39 ft/min). For CANopen, the accuracy is defined at a flow velocity >0.2 m/s (39 ft/min). 2) Defined at 23 °C (73.4 °F) with a coverage factor k=2, corresponding to a confidence level of 95 %.

Technical Data Outputs

Ordering Guide Feature

Accessories For further information see datasheet Accessories

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Sensor Technology (Shanghai) Co., Ltd. E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited E+E Elektronik Corporation T +1 847 490 0520 [email protected] datasheet_EE072 | Version v2.9 | 08-2025 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.