*mydirectindustry

Catalogs
E+E ELEKTRONIK
Datasheet EE046

Datasheet EE046

Product catalog summary

Overview
The EE046 condensation monitor is designed to prevent condensation on critical cold spots by detecting the risk of condensation using a relative humidity (RH) sensing element. It provides early warnings through a relay output and status LED.

Mounting Options
The EE046 is available in two variants: wall/pipe mount and snap-on mount. The wall/pipe mount is suitable for flat surfaces and pipes up to 50 mm in diameter, while the snap-on mount is for pipes with diameters of 16 mm or 20 mm.

Features

Compact design with versatile mounting options.
IP40 protection rating with a polycarbonate enclosure.
Wide RH/T working range and fast response time.
Relay output for early warning and power supply/cable failure indication.
LED status indication for operation and alarms.

Protective Sensor Coating
The E+E proprietary sensor coating extends sensor life and ensures optimal performance in corrosive environments, improving stability in dusty or oily conditions.

Calibration
The E+E calibration laboratory offers traceable calibration certificates, maintaining Austria’s national measurement standards and accredited by Akkreditierung Austria.

Technical Data

Measurands: Relative Humidity (RH) with a working range of 10-100% RH.
Response time: <25 seconds for RH change, <3 minutes for surface temperature change.
Output: Relay changeover contact, max. 24 V AC/DC, 1 A.
Power supply: 24 V AC/DC ±20%.
Temperature range: Operation 0-50°C, Storage -20 to +70°C.
Weight: Wall/pipe mount 60 g, Snap-on mount 80 g.

Ordering Guide
Features include type (wall/pipe or snap-on mount) and pipe diameter options. Calibration certificates are available as per DIN EN ISO/IEC 17025.

Contact Information
Company headquarters are located in Austria, with subsidiaries in China, France, Germany, India, Italy, Korea, and the USA.

Catalog excerpts

your partner in sensor technology.

Open the catalog to page 1

EE046 Condensation Monitor The EE046 condensation monitor helps to prevent condensation on critical cold spots. Using its relative humidity (RH) sensing element, it reliably detects the risk of condensation just before it occurs. Mounting Options The EE046 is available in two variants. The wall / pipe mount type is appropriate for installation on flat surfaces and on pipes with a maximum diameter of 50 mm (2"). It can be mounted on cooling ceilings, on cooling or cold water piping, cooled surfaces and chilled beams. The snap-on type can be mounted on plastic or aluminium composite pipes with...

Open the catalog to page 2

Features Performance ▪ Wide RH / T working range ▪ Fast response time ▪ Sensing element protection ▪ Protected electronics board Output and connection ▪ Relay output for early warning ▪ Indication for power supply / cable failure ▪ 5 poles push-in spring terminal Enclosure Mounting ▪ Compact design and easy mounting ▪ Versatile mounting options Wall / pipe mount Snap-on mount ▪ For pipe diameter N16 and N20

Open the catalog to page 3

Features Protective Sensor Coating The E+E proprietary sensor coating is a protective layer applied to the active surface of the sensing element. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, offshore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface. Accredited Traceable Calibration Certificate Internationally recognised certificates for the calibration of measuring instruments...

Open the catalog to page 4

Dimensions Values in mm (inch) Wall / Pipe mount Front view Wall mount Thermal conductive film Thermal conductive film Pipe mount

Open the catalog to page 5

Dimensions Values in mm (inch) Front view Side view Snap-on mount On Pipe Technical DataMeasurandsRelative Humidity (RH) Working range

Open the catalog to page 6

Technical Data Output

Open the catalog to page 7

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_EE046 | Version v1.4 | 08-2025 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.

Open the catalog to page 8

Datasheet EE046

Datasheet EE046

Catalog excerpts

All E+E ELEKTRONIK catalogs and technical brochures