your partner in sensor technology. DatasheetAVS701 Highly Accurate Air / Gas Velocity Sensor for Industrial Applications

AVS701 Highly Accurate Air / Gas Velocity Sensor for Industrial Applications The AVS701 air / gas velocity (v) and temperature (T) sensor is optimised for best measurement results and reliability in challenging industrial applications from 0 up to 40 m/s (0 to 8 000 ft/min) and -40...+140 °C (-40...+284 °F). Measurement Performance The AVS701 features best-in-class accuracy and durability by employing a high-end ceramic sensing element. The constant temperature anemometry working principle rests on the state-of-the-art thin film technology. The probe alignment key included in the scope of supply...

FeaturesMeasurement performance ■ Best-in-class accuracy Display ■ Shows up to 3 measurands simultaneously ■ Freely selectable layout and measurands ■ Linear gauges for quick perception ■ Configuration, adjustment and firmware update ■ Short-term power supply via USB ■ Device status indication via illuminatet port ■ Polycarbonate or die-cast aluminium ■ Easy mounting and service ■ Versatile connection options ■ 2 freely scalable analogue outputs, current / voltage ■ Error indication according to NAMUR ■ Accurate air velocity measurement from 0.06 m/s to 40 m/s Sensing probe ■ Poka-Yoke inspired...

Features Sensing Element Protection Proprietary hermetic polymer coating (varnish) protects the sensing element from corrosion in demanding environment and substantially extends sensor lifetime in applications with H2O2 sterilisation. Sensor Control Port The sensor control port is an RS485 interface with Modbus RTU protocol for the optional external pressure probe. The pressure data allow for the realtime calculation of the actual flow, can be shown on the display and is available on the outputs. A suitable pressure probe is available as an accessory. Accredited Traceable Calibration Certificate...

Code „probe length“ Connector side view Type T2 Duct mount L Code „probe length“ Code „probe length“

Code “probe length“ Additional crimping for alignment Probe‘s standard crimping G1/2" ISO or 1/2" NPT Cut-in fitting Code “cable length”1) 1) Refer to ordering guide Mounting flange Within scope of supply for T2 and T3 Probe alignment key Poka-yoke inspired tool, only one direction possible Within scope of supply for types T3 and T26 Flow direction Crimped probe Remote probe, pressure-tight up to 10 bar (150 psi) with cut-in fitting Remote probe „Arrow crimping

Technical Data Measurands

www.epluse.com v1.0 / All rights reserved | 8

Ordering Guide Feature 1) Applies to both analogue outputs.

Ordering Guide (cont’d)

Company Headquarters & Production Site 4209 Engerwitzdorf | Austria T +43 7235 605-0 F +43 7235 605-8 [email protected] www.epluse.com E+E Elektronik France SARL E+E Elektronik Deutschland GmbH T +49 6171 69411-0 [email protected] E+E Elektronik India Private Limited datasheet_AVS701 | Version v1.0 | 09-2025 © Copyright E+E Elektronik Ges.m.b.H. | All rights reserved. your partner in sensor technology.