DF-GR1500 Material data sheet

Product catalog summary

General Information
Material: 15% Graphite Filled PTFE
Purpose: Improves wear resistance, decreases friction, and enhances sliding properties against soft metals. It also improves temperature resistance to some extent.

Typical Physical Properties

Color: Black
Density (Specific Gravity): 2.10 - 2.16 g/cm³ (ASTM D-792)
Water Absorption (Max): <0.01% (ASTM D-570)
Flammability: V-0
Tensile Strength: ≥14 mpa (ASTM D-4894)
Elongation at Break: ≥180% (ASTM D-638)
Compressive Properties: 880 mpa
Hardness: Shore D 58 - 63 (ASTM D-2240)
Ball Hardness: 30 mpa
Service Temperature (Long Term): -180 to +260°C (ASTM D-648)
Surface Resistivity: >10⁶ ohm (ASTM D-258)
Volume Resistivity: >10⁷ ohm cm (ASTM D-257)

Notes:

The data provided are typical values for reference and comparison purposes only.
These values should not be used as a basis for design specifications or quality control.
Information is provided as a guide without obligation or liability.
Testing under individual application circumstances is recommended.

Contact Information
Shenzhen Dechengwang Technology Co., Ltd
Address: Floor 2-3, Bld D, Jinhengrun Industrial Park, Xintang, Guanlan, Longhua District, Shenzhen, CN 518110
Tel: 0086 755 2328 3050
Fax: 0086 755 8372 2725
Email: [email protected]

Catalog excerpts

Shenzhen Dechengwang Technology Co., Ltd Floor 2-3, Bld D, Jinhengrun Industrial Park, Xintang, Guanlan, Longhua District, Shenzhen, CN 518110 Tel: 0086 755 2328 3050 Fax: 0086 755 8372 2725 E: [email protected]

Open the catalog to page 1

All Dytron Advanced Materials Co., ltd catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list