PT46X6
3Pages

PT46X6 Series Features n Adjustable n Accuracy n Dymax® zero and span better than ± 0.5% coated stainless steel wetted parts n 0 - 10 Vdc and 1 - 11 Vdc outputs n 0 - 500 to 0 - 30,000 psi n Internal 80% shunt calibrations Benefits n Adapt transmitter to process conditions n Repeatable, n Superior n Direct n Wide n Easy reliable pressure measurements abrasion resistance input to supervisory control systems variety of pressure ranges to calibrate and use Description The PT46X6 Series transmitter is a ± 0.5% sensor ideal for general purpose melt pressure measurements requiring simple installation, repeatability and reliability. The PT46X6 transmitters provide the industry standard 0 - 10 Vdc amplified signal designed to work with DCS and PLCs, 1 - 11 Vdc outputs are also available. The PT46X6 comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X6 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. www.Dynisco.com Dynisco 38 Forge Parkway Franklin, MA 02038 USA Hotline Phone Fax Email 1-800-DYNISCO +1-508-541-9400 +1-508-541-6206 infoinst@Dynisco.com Dynisco europe Gmbh Pfaffenstr. 21 74078 Heilbronn Germany Phone Fax Email +49-7131-297-0 +49-7131-2326-0 dyniscoeurope@Dynisco.com

Specifications Performance Characteristics Outputs: PT46X6 - 0 - 10 Vdc PT46X6B - 1 - 11 Vdc Input Voltage: - 36 Vdc 16 Accuracy: 0.5% FSO combined error ± (Including Linearity, Repeatability & Hysteresis) Repeatability: 0.2% FSO ± Configuration: Four-arm bonded foil Wheatstone bridge strain gage Load Resistance: 2,000 Ohms minimum Over Pressure: FSO or 35,000 psi, (whichever is less) 2X Zero Balance Adjustment Range: ± 15% Span Adjustment Range: ± 15% Internal Shunt Calibration (R-Cal): 80% FSO ± 0.5% TEMPERATURE & MECHANICAL CHARACTERISTICS Max Diaphragm Temp: 750°F (400°C) Zero Shift...

MALE T/C CONNECTOR TYPE J FLEXIBLE BRAIDED ARMOR FEMALE T/C CONNECTOR TYPE J 4-40 SET SCREW (THERMOCOUPLE LOCK) - ZERO / SPAN ADJUST (COVERED CAPILLARY) All dimensions ate in inches (millimeters). ©2012. Dynisco reserves the right to make changes without notice. Refer to www.dynisco.com for access to Operator Manual and other support documentation.