Catalogs >
Dynisco >
PT460XL

PT460XL
3Pages

Catalog excerpts

• Accuracy better than +/- 1.0% • Inconel diaphragm • Superior temperature stability • Patented sensing element • Internal 80% shunt calibration • Reliable, repeatable pressure measurements • Superior abrasion and corrosion resistance • Ideal for high temperature processes • Superior durability • Wide variety of pressure ranges • Easy to calibrate with local indicator The PT460XL Series transducer is a +/- 1.0% sensor ideal for abrasive and/or corrosive melt pressure applications requiring simple installation, repeatability and reliability. The PT460XL transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460XL features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. PERFORMANCE CHARACTERISTICS Input Voltage: 10 Vdc recommended, 12 Vdc maximum (Including Linearity, Repeatability & Hysteresis) Configuration: Four-arm bonded foil Wheatstone bridge strain gage Bridge Resistance: Input: 345 Ohms minimum Over Pressure: 2 X FSO or 35,000 psi whichever is less Internal Shunt Calibration (R-Cal): 80% FSO +/- 1% Insulation Resistance: 1000 megohms @ 50 Vdc TEMPERATURE & MECHANICAL CHARACTERISTICS Zero Shift (due to temperature change): <20 psi/ioo°F Typical (<36 psi/ioo°C) Electronics Operating Temperature: 25o°F (i2i°C) Zero Shift Due to Temperature Change: Sensitivity Shift Due to Temperature Change: Mounting Torque: 500 inch/lbs. maximum Standard Wetted Parts: Inconel 718

Open the catalog to page 1

Ordering Guide Temperature Option blank = No temperature sensor Transducer Configuration o = Rigid stem, no flexible capillary 2 = Rigid stem with flexible capillary 3 = Rigid stem, flexible capillary with temperature sensor Pressure Range Stem Length Snout Length Standard mating connector Dynisco P/N 711600 or 6-pin mating connector cable assembly. Shaded sections refer to standard configurations. Accuracy may be affected if non-standard configurations are used. For additional options please consult factory. Franklin, MA 02038 (USA) Email infoinst@dynisco.com e 1-800-DyniSCO...

Open the catalog to page 2