PT4196
3Pages

PT4196 Series Features • • • • • • Adjustable zero and span Oil fill meets FDA dn USDA requirements Accuracy better than +/- 0.5% Dymax® coated convoluted SST wetted parts 0 - 10 Vdc output Internal 80% shunt calibration Benefits • • • • • • Easily adapt transmitter to process conditions Ideal for medical and food extrusion Repeatable, reliable pressure measurements Superior abrasion resistance Direct input to supervisory control systems Easy to set up Description The PT4196 Series transmitter is a +/- 0.5% sensor ideal for food or medical appllications requiring simple installation, repeatability and reliability. The food grade oil fill material meets the requirements set forth by both the USDA and the FDA. The PT4196 transmitters provide the industry standard 0 - 10 Vdc amplified signal designed to work with DCS and PLCs. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT4196 features a 1/2-20 UNF thread for simple and easy installation in standard transducer mounting holes. Specifications PERFORMANCE CHARACTERISTICS Output: 0 - 10 Vdc Input Voltage: 16 - 36 Vdc Accuracy: +/- 0.5% FSO, Repeatability: +/- 0.2%FSO Configuration: Four-arm bonded foil Wheatstone bridge strain gage Load Resistance: 2,000 Ohms minimum Over Pressure: 2 X FSO Zero Balance Adjustment Range: +/- 15% Span Balance Adjustment Range: +/- 15% Internal Shunt Calibration (R-Cal): 80% FSO +/- 0.5% Fill material meets FDA requirements 21 CFR 178.3620, 21 CFR 172.878, and 21 CFR 573.680 TEMPERATURE & MECHANICAL CHARACTERISTICS Max Diaphragm Temperature: 617oF (315oC) Recommended Max Diaphragm Temperature for Extended Product Life: 527oF (275oC) Zero Shift (due to temperature change): 36 psi/100oF Typical (65 psi/100oC) Electronics Operating Temperature: -20oF to 185oF (-25oC to 85oC) Zero Shift Due to Temperature Change: +/- 0.05% FS/oF max (+/- 0.10% FS/oC max) Span Shift Due to Temperature Change: +/- 0.02% FS/oF max (+/- 0.04% FS/oC max) Mounting Torque: 500 inch/lbs. maximum Standard Wetted Parts: Dymax® coated 15-5 PH SST www.dynisco.com 119

Ordering Guide Temperature Option blank = No temperature sensor Pressure Range Stem Length *Not available with temperature sensor Snout Length Standard mating connector Dynisco P/N 711600 or 6-pin mating cable assembly. Shaded sections refer to standard configurations. Accuracy may be affected if non-standard configurations are used. For additional options please consult factory. Franklin, MA 02038 (USA) Email infoinst@dynisco.com e 1-800-DyniSCO WWW.dyniSCO.COITI

ZERO / SPAN ADJUST ACCESS .62 HEX (15.8) 1/2-20 UNF-2A 45 ° 30' 44 ° 30' Ø .414 .412 ( Ø10.52 ) 10.46 SPAN ZERO Ø .307 .305 Ø 1.50 (Ø38.1) (Ø Ø .42 (Ø10.7) Ø .50 (Ø12.7) .44 (11.18) .214 5.44 (5.44) .56 14.2 .45 11.4 REF 1.06 (26.9) .82 20.9 ZERO AND SPAN ADJUST SCREWS ARE PROTECTED BY SEAL SCREWS 6.00 ( 152.4) 3.50 88.9 10.25 260.3 BENDIX CONNECTOR P1T02A-10-6P OR EQUIVALENT MATING CONNECTOR PT06A-10-6S (SR) OR EQUIVALENT 7.80 ) 7.75 NOMINAL ZERO / SPAN ADJUST ACCESS Ø .69 (Ø17.3) MTG LUG .28 OD FLEXIBLE ARMOR (7.1) (COVERED CAPILLARY) .62 HEX (15.8 ) 45 ° 30' 44 ° 30' 1/2-20 UNF-2A Ø .414...