Echo
3Pages

Features n 2 year warranty and 60 years of Dynisco industry experience n Accuracy better than ±0.5% n TiAlN diaphragm coating is standard n mV/V, 0-10VDC, or mA outputs available n Integral temperature sensor option n Available in configurations that fit most extruder applications n 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability Description Trusted for quality, reliability and accurate performance at an affordable price. The EchoTM Series of melt pressure sensors offer quality performance and value for plastic processing utilizing standard configurations and pressure ranges. Echo sensors are designed to meet customer requirements by providing a combination of economic value and performance for general extrusion applications while providing a ±0.2% repeatability when measuring process pressures. Use Echo Series sensors when the application requires a quality measurement for optimized control, but not the costs of all the extra features. Dynisco has produced field-proven pressure sensors for more than 60 years. Echo was designed with the best engineering practices and is backed by Dynisco with a two full years of warranty – double the protection of comparably-priced sensors. Echo sensor diaphragms are coated with Titanium Aluminum Nitride, as a standard offering, providing superior performance over less effective Titanium Nitride coatings. Dynisco technology is widely accepted by OEM’s and end users throughout the world. The Echo Series sensors are available with 3.33mV/V, 4-20mA, 0-5VDC or 0-10VDC outputs designed to work with most industrial controls. In addition to melt pressure measurement, Echo Series offer a optional melt temperature measurement with type J, K thermocouples or RTD. The Echo Series are equipped with a 1/2-20 UNF or M18 thread for installation in standard transducer mounting holes. Additional mounting configurations are available. www.dynisco.com Dynisco 38 Forge Parkway Franklin, MA 02038 USA Hotline 1-800-Dynisco www.dynisco.com Phone +1-508-541-9400 Fax +1-508-541-6206 Email infoinst@dynisco.com Dynisco Europe, GmbH Pfaffenstr. 21 74078 Heilbronn Germany Phone +49-7131-297-0 Fax +49-7131-297-166 Email dyniscoeurope@dynisco.com Dynisco (DVI) Lot 3615, Jalan SM 6/8, Kawasan Perindustrian 32040 Seri Manjung, Perak, Malaysia Email infoinst@dynisco.com

Specifications PERFORMANCE CHARACTERISTICS Input excitation: mV/V: 10VDC recommended, 12VDC max VDC: 16-30VDC mA: 14-30VDC Output, Analog: 3.33mV/V, 0-10VDC, or 4-20mA Accuracy*: ±0.5% FS Repeatability: ±0.2% FSO MECHANICAL & PACKAGING CHARACTERISTICS Sensor Technology: 4-arm bonded foil strain gage Wheatstone bridge Diaphragm Temperature: Zero Shift (process temp change): 662° F (350°C) for Rigid 752° F (400°C) for Flex 25 psi/100˚F (45psi/100˚C), nominal Electronics Operating Temperature, max: mV/V:250°F(120°C);mA,VDC:185°F(85°C) Diaphragm Wetted Parts: 17-4 PH SST Electrical Connection:...

CONFIGURATION WITH 6 INCH SNOUT LENGTH AND 18 INCH FLEXIBLE LENGTH ELECTRONICS SHELL ON mA VERSION IS 0 1.50 [ 38.1 ] X 3.75 [ 95.2 ] LONG All dimensions ate inches (mm) unless otherwise specified. ©2012. Dynisco reserves the right to make changes without notice. This product is manufactured in Malaysia. Refer to www.Dynicso.com for access to Instruction Manual and other support documentation.