- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Gortube®
Gortube®
The document provides detailed specifications for various models of GORTUBE® steel enclosed-style carriers. Each model is defined by dimensions A, B, C, D, and weight in lb/ft (kg/m). For example, Model CO has dimensions 1.02 inches (26 mm) for A, 0.63 inches (16 mm) for B, and a weight of 0.40 lb/ft (0.60 kg/m).
Additional specifications include height (R), H, K, CL, and P dimensions for different configurations, such as C1-6 and C2-10, with specific measurements provided in inches and millimeters.
The part number is configured by combining the model, height, length, and bracket types (fixed and moving). An example configuration is C2C-11-34.00-TYPE B-TYPE A.
Optional construction types include Amflex (inner band), Riveted, No Band, and Black Oxide finish. Consultation with the factory is recommended for lead times.
Dynatect recommends a 10% cable clearance, 20% hose clearance, and a 60% maximum fill. The stationary end of the carrier should be mounted at the center of travel to minimize required length.
Specifications for standard flange options and Type A and B flange options are provided, detailing dimensions such as D1, Q, M, E, and others for various models.
Standard flange mounting arrangements are specified, with options for Standard, Type A, and Type B flanges.
Catalog excerpts
GORTUBE® SERIES | STEEL (enclosed-style carriers) PART NUMBER CONFIGURATION: Model C2C Bracket (fixed) Bracket (moving) TYPE B TYPE A Following above example, add dashes. Part number = C2C-11-34.00-TYPE B-TYPE A Carrier Length (between flanges) is specified to two decimals in inches. Total number of links depends on pitch length. Specify bracket type (STD, TYPE A, TYPE B) for each end. Specify arrangement if standard (STD) bracket. Email: [email protected]
Open the catalog to page 1
GORTUBE® SERIES | STEEL (enclosed-style carriers) CARRIER SIDE VIEW Total Travel Moving End P = Recommended clearance above track. Please alert Dynatect to any space restrictions. Fixed End Support Surface Travel/2 + CL (+ Offset Distance From Center*) = Length Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length. In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation. CARRIER CROSS SECTION C A Dynatect Recommends: • 10% Cable Clearance • 20% Hose Clearance • 60% Maximum...
Open the catalog to page 2
GORTUBE® SERIES | MOUNTING FLANGES (enclosed-style carriers) SPECIFICATIONS – STANDARD FLANGE OPTIONS C1 inches (mm) GORTUBE STANDARD FLANGE L STANDARD FLANGE ARRANGEMENTS – Please specify arrangement when ordering standard flanges Standard Flange Mounting Arrangements 2 3 Standard Flange (specify “STD” in part number) Type “A” Flange (specify “TYPE A” in part number) Type “B” Flange (specify “TYPE B” in part number) Email: [email protected]
Open the catalog to page 3
GORTUBE® SERIES | MOUNTING FLANGES (enclosed-style carriers) SPECIFICATIONS – TYPE A FLANGE OPTIONS C1 inches (mm) SPECIFICATIONS – TYPE B FLANGE OPTIONS C1 inches (mm) Type B flange not available for C5 Type B flange not available for C6 GORTUBE TYPE “B” FLANGE GORTUBE TYPE “A” FLANGE C1 G Email: [email protected]
Open the catalog to page 4All Dynatect Manufacturing, Inc. catalogs and technical brochures
NYLATRAC ® MODULAR TS series2 Pages
GORTRAC ® STEEL SA series2 Pages
Bellows Brochure28 Pages
Ball Screw6 Pages
Precision Slip Clutch Full22 Pages
Dynatect Cable & Hose Carriers99 Pages
