SLIM Tach® SL1250 | Encoder
1 / 2 PagesView full catalog
SLIM Tach® SL1250 | Encoder
Product catalog summary
Specifications
Standard Operating Characteristics
Electrical Specifications
Mechanical Specifications
Environmental Specifications
Ordering Information
Contact Information
- Product: NorthStar™ brand SERIES SL1250 Bearingless Encoder
- Design: Bearingless, mounts to 250-C face motors, requires 1.4” of motor shaft
- Technology: Magneto-Resistive, resistant to dust, dirt, oil, water, and other contaminants
- Outputs: Single or dual isolated outputs available
Standard Operating Characteristics
- Code: Incremental
- Pulses per Revolution: 64-1024
- Phasing Sense: A leads B for counter-clockwise rotation
- Quadrature Phasing: 90° ± 22°
- Symmetry: 180° ± 54°
- Index: 270°, ungated (optional gated to falling B edge)
Electrical Specifications
- Input Voltage: 5-15 or 5-26 Volts DC
- Current Requirement: 45 mA or 65 mA typical per sensor module plus line driver load
- Output Signals: Various line driver options with different voltage and current specifications
- Frequency Response: 0 - 120kHz
- Electrical Immunity: 2kV ESD, reverse polarity, short circuit
- Connector: 10 pin industrial duty latching, sealed NEMA 4 & 12, IP65
Mechanical Specifications
- Shaft Speed: 5,000 RPM
- Mounting Configuration: 12.5” C face mount for NEMA MG1-4 standards
- Housing Material: Cast Aluminum
- Acceleration Rate: 12,000 rpm/sec max
- Shaft Length Required: 1.1” min
- Allowable Shaft End-Play: ± 0.045”
- Allowable Shaft Runout: 0.003” TIR
- Weight: 11 lbs.
Environmental Specifications
- Operating Temperature Range: Standard: -40°C to +90°C, Extended: -40°C to +120°C
- Storage Temperature Range: -40°C to +120°C
- Humidity: Up to 98% RH (non-condensing)
- Shock: 1 meter drop test, 30 G’s Min
- Vibration: 18 G’s @ 5-2000 Hz spectrum
Ordering Information
- Model and configuration codes for termination, PPR, wheel bore, index, electrical, and cover/adapter options are provided for customization.
Contact Information
- Headquarters: 1675 Delany Road, Gurnee, IL, USA
- Customer Service: Tel: +1.800.873.8731, Fax: +1.847.662.4150, Email: [email protected]
- Technical Support: Tel: +1.800.234.8731, Fax: +1.847.782.5277, Email: [email protected]
See more
All Dynapar catalogs and technical brochures
R25 | Heavy Duty Resolver2 Pages
M9 | Miniature Encoder2 Pages
R45 | Bearingless Ring Kit2 Pages
RI80E | Hollowshaft Encoder2 Pages
SLIM Tach® SL85 | Encoder4 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.