Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Dynapar
  3. SLIM Tach® HS56 | Hollow Shaft Encoder

SLIM Tach® HS56 | Hollow Shaft Encoder

SLIM Tach® HS56 | Hollow Shaft Encoder
1 / 2 PagesView full catalog

SLIM Tach® HS56 | Hollow Shaft Encoder

Product catalog summary
Specifications
  • Product: Heavy Duty Hollow Shaft Encoder, Series HS56 NorthStar™
  • Compliance: EN 61326
Standard Operating Characteristics
  • Code: Incremental
  • Pulses per Revolution: 64-2048
  • Phasing Sense: A leads B for Counter-Clockwise rotation (CCW)
  • Quadrature Phasing: 90° ± 22°
  • Symmetry: 180° ± 54°
  • Index: 270°, ungated (optional gated to falling B edge)
Electrical Specifications
  • Input Voltage: 5-15 or 5-26 Volts DC
  • Current Requirement: 45 mA or 65 mA per sensor module plus line driver load
  • Output Signals: Line Driver options with varying voltage and current
  • Frequency Response: 0 - 120kHz
  • Electrical Immunity: 2kV ESD, Reverse Polarity, Short Circuit
  • Connector: 10 pin industrial duty latching, sealed NEMA 4 & 12, IP65
Mechanical Specifications
  • Mating Shaft Sizes: 5/8” to 1-1/8”
  • Shaft Speed: 3,600 RPM
  • Mounting Configuration: Hollow Shaft mount with Anti-Rotation Tether
  • Housing Material: Hard Anodized Aluminum with Stainless Steel Hub
  • Acceleration Rate: 3,600 rpm/sec max
  • Shaft Length Required: 2.0” min
  • Allowable Shaft End-Play: ± 0.150”
  • Allowable Shaft Runout: 0.015” TIR typical
Environmental Specifications
  • Operating Temperature Range: -20°C to +80°C
  • Storage Temperature Range: -40°C to +120°C
  • Humidity: up to 98% RH (non-condensing)
  • Shock: 1 meter drop test, 30 G’s Min
  • Vibration: 18 G’s @ 5-2000 Hz spectrum
Electrical Connections
  • Various pin configurations for signal connections
Key Features
  • Hollowshaft Design with Heavy-Duty Bearings
  • Magneto-Resistive Technology
  • Accommodates Shaft Sizes from 5/8" to 1-1/8"
  • Stainless Steel and Anodized Aluminum Construction
  • Dual Isolated Outputs Available for Redundancy
Ordering Information
  • Various codes for termination, PPR, model, wheel bore, index, and electrical options
Dimensions
  • Detailed measurements provided in inches and millimeters
See more

All Dynapar catalogs and technical brochures

  1. 10/15/21/31/55 | Heavy Duty Brushless Resolvers
    10/15/21/31/55 | Heavy Duty Brushless Resolvers

    2  Pages

  2. HaroMax Size 21 | Frameless Resolver
    HaroMax Size 21 | Frameless Resolver

    2  Pages

  3. 11/R11 | Heavy Duty Brushless Resolvers
    11/R11 | Heavy Duty Brushless Resolvers

    2  Pages

  4. R25 | Heavy Duty Resolver
    R25 | Heavy Duty Resolver

    2  Pages

  5. AD25 | Single- / Multi- Turn Absolute Encoder
    AD25 | Single- / Multi- Turn Absolute Encoder

    2  Pages

  6. AD34 | Single Turn Absolute Encoder
    AD34 | Single Turn Absolute Encoder

    2  Pages

  7. AD35 | Single Turn Absolute Encoder
    AD35 | Single Turn Absolute Encoder

    2  Pages

  8. AR62/AR63 | Magnetic Absolute Encoder
    AR62/AR63 | Magnetic Absolute Encoder

    2  Pages

  9. AX70/AX71 | Magnetic Absolute Encoder
    AX70/AX71 | Magnetic Absolute Encoder

    4  Pages

  10. HSD44 | Extreme Heavy Duty Encoder
    HSD44 | Extreme Heavy Duty Encoder

    2  Pages

  11. M9 | Miniature Encoder
    M9 | Miniature Encoder

    2  Pages

  12. R45 | Bearingless Ring Kit
    R45 | Bearingless Ring Kit

    2  Pages

  13. RI80E | Hollowshaft Encoder
    RI80E | Hollowshaft Encoder

    2  Pages

  14. X25 | For Hazardous Location Application
    X25 | For Hazardous Location Application

    2  Pages

  15. SLIM Tach® HS60 | Hollowshaft Encoder
    SLIM Tach® HS60 | Hollowshaft Encoder

    2  Pages

  16. SLIM Tach® SL1250 | Encoder
    SLIM Tach® SL1250 | Encoder

    2  Pages

  17. SLIM Tach® SL85 | Encoder
    SLIM Tach® SL85 | Encoder

    4  Pages

  18. W56 | Heavy Duty Bearingless Encoder
    W56 | Heavy Duty Bearingless Encoder

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.