Dynapac Compact Planer Range
12Pages

COMPACT PLANERS are ideal for narrow jobsite areas where asphalt or concrete surfaces need to be milled. Because traffic is increasing on aging roads, cold planers play a vital role in the upkeep of infrastructure while also helping to reclaim material for reuse. Dynapac Cold planers are designed to deliver maximum productivity in varying jobsite and operating conditions. DYNAPAC MILLS THE FUTURE Dynapac’s three compact planers have milling widths from 0.35 – 1 m and are heavily equipped. These planers are built for tight applications and are easy to maneuver in urban construction zones....

OVERVIEW OF IMPRESSIVE CAPABILITIES QUICK-EXCHANGE SYSTEM With a wide side cover on the milling chamber, the side-mounted milling drums on all Dynapac compact planers can be quickly and easily exchanged. Fine milling drums, as well as a cutting wheel (PL500), are available for varied applications. As a result, these planers are ready for operation on the most diverse jobs, providing a clear advantage in terms of flexibility and reduced costs. WORK AROUND THE CLOCK All compact planers have working lights and a backlit panel for night work as standard, meaning you can easily work during night...

ALL-AROUND PROTECTION Dynapac has designed a robust, square profile for the chassis legs for compact planers starting at 500 mm milling widths. For further stabilization, the square profile has been rotated by 45° in order to increase the strength once again. In comparison to round pipes, this design achieves remarkably increased longe­ ity. Nevertheless, should v tolerances arise at some point due to wear and tear, the wear plates are easily adjustable. Thanks to automatic control of the water spray system, resources can be effectively conserved and the operator can be relieved from...

DYNAPAC PL350 COMPACT PLANER DYNAPAC PL350 The Dynapac PL350 is the smallest model of a new generation of compact planers from Dynapac. The three-wheel cold planer is specially developed for partial repairs of asphalt and concrete pavements and removing of surfaces in buildings. The hydrostatically front driven three-wheel compact planer with hydraulical drum drive is capable of removing concrete and asphalt across a cutting width of 350 mm at a maximum cutting depth of 100 mm. OPTIMUM VISIBILITY FOR THE OPERATOR The ergonomic positioning of the driver behind the cutting drum allows for a...

PIVOTING IN PLACE With an equal steering angle of 75° both to the right and to the left, the Dynapac PL350 achieves a level of maneuverability in narrow construction sites that is unmatched. There is no constriction when steering to the left due to the cylinder steering. With a milling radius of only 10 cm, pivoting on the spot is almost possible. REMOVABLE WEIGHT The balanced distribution of weight provided by the removable ballast allows for milling without vibrations; this is especially advantageous when performing sensitive tasks such as demarcation. The front ballast weight can be...

DYNAPAC PL500 AND PL1000 COMPACT PLANERS DYNAPAC PL500 & PL1000 ON A REPAIR JOB Use of Dynapac PL500 or PL1000 compact planers for removing the existing surface course within the range of a bridge. The units can be equipped with an optional short or long conveyor for loading into a bucket or on a truck. For deep milling cuts, the Dynapac PL500 or PL1000 are the best options. With the engine output of 97/150 kW as well as a belt drive that operates with almost no power loss, the Dynapac complact planers effortlessly achieve a milling depth of 200 - 300 mm. The combination of intelligent...

WEATHER PROOF The operator’s seat can be shifted outward, allowing an unobstructed view over and along the cutting edge. A low frame height behind the operator’s seat allows for a clear view of the conveying belt. Unique hydraulically liftable weather proof canopy. A CLEAR VIEW A clear view of the cutting edge and a good all-around view are important when milling. HIGH CAPACITY Water tanks and diesel tanks are the largest in the class. 4 WHEELS PARALLELOGRAM AXLE Dynapac offers a patented parallelogram axle, cutting around manholes is possible at any time.

DYNAPAC PL500 AND PL1000 COMPACT PLANERS MORE POWER, IMPROVED MANEUVERABILITY Higher performance and innovative features will help milling operators get the job done even faster and more efficiently. The new Dynapac compact planers offer an impressive 20 percent more power at a maximum milling depth of 300 mm, which substantially enhances milling performance when tackling deep cutting jobs or hard and abrasive material. This power, combined with a small turning radius and a best in class and quickly detachable rear discharge conveyor, makes the new model ideal for larger jobs in cities or...

THE PERFECT SOLUTION The patented parallelogram front axle substantially reduces wear on the tire on shoulders and increases traction and wheel control on a grade. TURNING RADIUS - BEST IN CLASS The small cutting radius of only 9 in, unmatched in this class, makes the high-performance Dynapac PL500 and PL1000 compact planers very flexible. Milling around manholes is possible at any time and operation in narrow urban areas becomes very easy. MILLING DRUM TECHNOLOGY The layout for the standard milling drum is adapted to the machine’s specific parameters. Our many years’ of experience with...

TECHNICAL DATA DYNAPAC COMPACT PLANER RANGE SHIPPING DIMENSIONS Planer without conveyor (LxWxH) mm Conveyor (LxWxH) mm 3.4 t (incl. conveyor) 7.2 t 3.7 t (incl. conveyor) 7.6 t 1.11 t 0,1 t 0,6 t 4.6 t (incl. conveyor) 4.9 t (incl. conveyor) 8,6 t CUTTING SECTION Working width Cutting depth Cutting diameter Spacing Number of tools WORKING PERFORMANCE Operating speed Travel speed TANK CAPACITIES Fuel tank Hydraulic tank Water tank ELECTRICAL SYSTEM Heavy- duty cold start battery Generator 1 LOADING SYSTEM Belt width Maximum discharge height MASSES Transport mass Operating mass (CE) Ballast...