XSIZE ™ Automatic Sampler Takes samples during blending or mixing operation The XSIZE™ automatic sampler from Dynamic Air Inc. has been designed to take almost any sample size automatically during a blending or mixing operation. It provides a method to take samples at any point in a process system for verication of dry bulk materials. Fabricated from all 304 or 316 stainless steel construction, it can be programmed to take a sample upon demand at predetermined times as required. The XSIZE automatic sampler is designed for mounting directly on a mixer, discharge chute or any place in the process desired. Samples are then collected in a standard commercially available clear plastic container. Removal of the plastic container is simple and done manually. Special features include a highly polished, 304 or 316 stainless steel feed screw and a powerful 220/440 volt motor and drive assembly. Features Highly polished stainless steel feed screw T.E.F.C. 220/440 volt motor and drive assembly Custom feed rates Programmable Made to t most standard clear plastic jars Air operated isolation valve Simple mounting arrangement Dynamic Air Conveying Systems is a registered trademark and XSIZE is a trademark of Dynamic Air Inc., St. Paul, MN. Corporate Headquarters Dynamic Air Inc. • St. Paul, MN USA • +1 651 484-2900 Worldwide Ofces Australia • Brazil • China • United Kingdom www.dynamicair.com