Electrical Control Systems Dynamic Air electrical control system designs range in size from 30 I/O points to over a 1000 I/O points and larger. Large control systems commonly include multiple processors, remote I/O, and multiple operator interfaces in many different congurations depending upon the equipment provided and the customer’s requirements. UL and CUL Certied Manufacturing Facility Dynamic Air is an Underwriters Laboratories (UL) and CUL Canadian certied panel manufacturing facility. All control panels provided by Dynamic Air are built to UL/CUL specications and carry the UL/CUL label. We also offer control panels that can be manufactured to be CE compliant and CSA (Canadian Standards Association) compliant when requested. Complete Testing System Testing of control system software and hardware is a top priority. Dynamic Air has a “state-of -the-art” simulator capable of testing up to six different fullscale control systems simultaneously. This system includes discrete and analog I/O that is physically connected to a control system as it would be in the eld and can simulate entire conveying, weighing, blending, mixing, or drying systems. Bulletin 21117-T © 2011 Dynamic Air Inc. Dynamic Air Conveying Systems is a registered trademark of Dynamic Air Inc., St. Paul, MN. Corporate Headquarters Dynamic Air Inc. • St. Paul, MN USA • +1 651 484-2900 Worldwide Ofces Australia • Brazil • China • United Kingdom www.dynamicair.com