1. Catalogs
  2. Dynamic Air
  3. DC-5 Air Saver

DC-5 Air Saver

DC-5 Air Saver

Product catalog summary
Overview: The DC-5® Air Saver technology is designed to enhance the efficiency and reliability of pneumatic conveying systems by maintaining an optimal pressure balance. It is adaptable to various Dynamic Air pneumatic systems, regardless of pressure or vacuum conditions.
Key Benefits:
  • Decreased energy consumption.
  • Improved system reliability.
  • Capability to convey fragile, abrasive, cohesive, and heavy materials.
  • Ability to start and stop with a full conveying line.
  • Reduced dynamic loading at pipe bends and dust handling requirements.
  • Minimized material degradation.
Technology Features: The DC-5 Air Saver technology automatically senses and adjusts to system conditions, ensuring a smooth and controlled material flow. It prevents overcompensation by accurately controlling the conveying velocity, optimizing the process for higher performance.
Operational Efficiency: Achieving an optimum pressure balance is crucial for a successful pneumatic conveying system. The DC-5 technology addresses unstable pressure conditions by counterbalancing friction factors, thus avoiding the use of excessive or insufficient compressed air.
Corporate Information: Dynamic Air Inc., headquartered in St. Paul, MN, offers this technology globally with offices in Australia, Brazil, China, and the United Kingdom.
See more

Catalog excerpts

DC-5 Air Saver-1

DC-5 ® Air Saver Dynamic Air’s exclusive DC-5® Air Saver technology is the key to complete control of material through the entire conveying line One of the secrets of a successful and highly efcient pneumatic conveying system, whether it is a high pressure dense phase system or a low pressure dilute phase system, is achieving an optimum pressure balance. Many systems operate in an unstable and/or unbalanced pressure condition. This means the conveying system can be using either too much compressed air or not enough compressed air, both of which are undesirable. To effectively counterbalance all the friction factors normally inherent in a pneumatic conveying system, Dynamic Air has developed the DC-5 Air Saver technology which accurately controls and pressure balances the pneumatic conveying system. The DC-5 Air Saver technology achieves the proper pressure balance because it automatically senses the conveying system conditions and reacts instantaneously and accurately without overcompensation. Thus material is conveyed through the conveying line in a smooth, controlled manner and at the desired conveying velocity, to optimize the conveying process for higher performance and reliability. The DC-5 Air Saver technology is adaptable to almost any type of Dynamic Air pneumatic conveying system regardless of the conveying pressure or vacuum. Benets Decreased energy consumption Improved system reliability Ability to convey very fragile materials Ability to convey highly abrasive materials Ability to convey difcult or cohesive materials Ability to convey heavy materials Ability to start and stop the conveying process with a conveying line full of material Reduced “dynamic loading” at pipe bends by controlling the conveying velocity Reduced dust handling requirements Reduced material degradation Dynamic Air Conveying Systems and DC-5® are registered trademarks of Dynamic Air Inc., St. Paul, MN. Bulletin 21104-T © 2011 Dynamic Air Inc. Corporate Headquarters Dynamic Air Inc. • St. Paul, MN USA • +1 651 484-2900 Worldwide Ofces Australia • Brazil • China • United Kingdom www.dynamicair.com

 Open the catalog to page 1

All Dynamic Air catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.