Overview: The document provides technical specifications for the 8000 Series
Inertial Measurement Unit (IMU) by Dynalabs, which includes
gyroscopes and
accelerometers. It highlights the flexibility of combining these components for various applications.
Specifications:- Gyroscopes: Available in full-scale angular velocities of ±75, ±150, ±300, and ±900 °/s with a frequency range of 0-150 Hz. Non-linearity is consistent at 0.06% across all models, with noise levels at 0.018 °/s/√Hz. The scale factor varies from 0.012 to 0.001 V/°/s, and bias variation with temperature ranges from ±1 to ±4 °/s.
- Accelerometers: Full-scale acceleration options include ±2 to ±200 g, with frequency ranges from 150 to 1,000 Hz. Non-linearity is 0.1%, and noise levels range from 7 to 678 μg/√Hz. The scale factor ranges from 1,350 to 13.5 mV/g, with a temperature coefficient of 120 ppm/°C. Bias temperature coefficient varies from ±0.2 to ±20 mg/°C.
Applications: The IMU is suitable for automotive in-car navigation, vehicle and personal navigation aiding, vehicle yaw, pitch, and roll rate sensing, antenna stabilization, motion control, and railway engineering.
Features: The unit offers accurate 6 DOF DC measurement, robust silicon MEMS vibrating ring gyro, high shock and vibration rejection, class-leading bias and noise over temperature, low noise, high resolution, and customizable options for cable length, housing material, and connectors.
Weight: The unit weighs 27.5 g with an aluminum housing and 69.5 g with a steel housing.
See more