Specifications:
The 1000LN Series includes models 1002LN, 1005LN, 1010LN, 1030LN, 1050LN, 1100LN, and 1200LN. These models vary in full-scale acceleration from ±2g to ±200g, with corresponding sensitivities ranging from 1,350 mV/g to 13.5 mV/g. The frequency range is consistent at 1,500 Hz for most models, except for the 1002LN and 1005LN, which have lower ranges. Non-linearity is maintained at 0.1% across all models. Noise levels increase with the model number, from 7 μg/√Hz to 678 μg/√Hz. Bias temperature varies from ±0.2 mg/°C to ±20 mg/°C, and shock survivability is between 2,500g and 3,000g.

Physical and Environmental:
The accelerometers have a protection level of IP 65 and operate within a voltage range of 3.3 V to 20 V. They can function in temperatures from -40 °C to +100 °C. The weight varies depending on the housing material, with aluminum models weighing 8 g and steel models 20 g. Optional connectors include D-Sub 9 or 15 pin, Lemo, and Binder, with mounting options of adhesive or screw mount. Base plates are available in aluminum or steel.

Features:
The accelerometers offer accurate DC measurement, high shock protection, low noise with high resolution, differential output signal, and gas damping. They are suitable for structural monitoring and testing, aerospace vibration testing, automotive ride quality and comfort, railway engineering, and GVT and flutter testing.

Options:
Customizations include cable length, housing material, connector type, and base plate material.