Conveyor System equipped with Steel Belt & Suction Chamber 5er The steel belt with arrayed thin holes moves on a suction chamber made of spongy hard material. Position of the objects on the belt is being secured by ihe air flow, and flexible materials are flattened during transportation. ■1." p and down movement of bell surfacc is limi E*d10 O.OSmrn and less- I ■This conveyor system provides an adequate environment for the printing on [he bell because of the very small elasticity of steel belt. ■When the belt is coated by PTFE, wiping eomaniinjtfions like ink, pigments, dye etc. off the bell is very easy, ■The sleel bell lias tile nature of strong resistance to abrasion. •Curled paper and plastic films can be flattened by applyiitg suction air flow in the entire area. 5S2 5851 This is measurement on our test eunvevor i*y our own measurement criteria. 5S52 Certain material and firm cutis may not become flat. ■Printing on address label un'or prescribed form during belt transportation. ■Transportation of silicon cells, plastic films, •Transfer system in image inspection device. [terns to he inspected arc fixed On the swclion bell. ■ Inclined bell transportation. Reversed hclt transpOrtuLi rJTrrTca in 14 —J 2-7-13, Fukuura, KtinaatM i»-l£M, Yokohama 136-QW4 JAPAN