Catalogs >
DYCOMETAL EQUIPOS DE CONTROL DE CALIDAD, S.L. >
DUST TEST CHAMBER

DUST TEST CHAMBER
4Pages

Catalog excerpts

The CP series dust tightness test chambers have been designed to carry out dust tests, exposing the sample to the study of the resistance of penetration of external particles on the sample, to guarantee its tightness. The different existing testing standards alphanumerically classify the different degrees of protection of the components to be tested according to the level of protection of the materials against the entry of foreign matter, as shown in the following table. The samples susceptible to this type of Test are usually: road lighting systems, electronic and electrical signaling...

Open the catalog to page 2

DYCO METAL TeS’C/Wp 7'e-oA/ra^a^-^ DUST TEST CHRfTlBER, CP SERIES • Interior made of 18/8 and satin stainless steel sheet. • Insulation composed of CFC-free polyurethane and mineral rock wool panels. Total impermeability and resistance to the corrosive attack of acids and alkalis. • Exterior Made of AISI 18/8 quality stainless steel sheet, satin-finished and oven-painted according to RAL 9010. • Mechanical pressure closure ensures the closing of the door. Flexible silicone gasket on the entire door seal to ensure tightness of the door closure. • Front opening door with tempered glass...

Open the catalog to page 3

Located on the front panel of the furniture where the programming elements, pressure control, current disconnector as well as switches and indicator lights necessary for each function are presented, all duly marked and presented in an ergonomic control and maneuver position. The programming of the powder cycles will be done using a programmer for the blowing cycle and full automatic cycle. Control comes from the following actuators • ON/OFF selector. • VIBRATOR switch. • DEPRESSOR SYSTEM switch. • Flow display. • Manometer. • HIGH/LOW SUCTION selector. Parc D’activitats De Viladecans C/ De...

Open the catalog to page 4